508119
9
Zoom out
Zoom in
Previous page
1/51
Next page
ENG-8
2
Mount the speed sensor and magnet
2-1. Temporarily secure the speed sensor
1. Loosen the sensor screw on the speed
sensor using a Phillips screwdriver to check
that the sensor arm moves.
* Do not completely remove the sensor screw.
2. Attach the sensor rubber pad to the speed
sensor, locate the speed sensor on the left
chain stay as shown in the figure above, and
temporarily secure it with the nylon ties.
Caution:
Do not tighten the nylon ties completely at
this stage. Once a nylon tie is tightened, it
cannot be pulled out.
2-2. Temporarily secure the magnet
1. Temporarily secure the cadence magnet
inside the crank with nylon ties, so
that it faces the sensor zone on the
CADENCE side.
2. Turn the sensor arm, and temporarily
secure the wheel magnet to the spoke
that faces the sensor zone on the
SPEED side.
* When the speed sensor is not posi-
tioned appropriately in respect to the
two magnets (of CADENCE and SPEED),
move the speed sensor back and forth
so that it is positioned properly. After
you move the speed sensor, adjust the
position so that the two magnets face
the relevant sensor zone.
Wheel magnet
Cadence magnet
Speed sensor
Speed sensor
Sensor armSensor arm
Sensor
screw
Sensor
rubber pad
Nylon ties
Wheel magnet
Cadence magnet
Nylon ties
Sensor
zone
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-TR210DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-TR210DW in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-TR210DW

Cateye CC-TR210DW User Manual - German - 51 pages

Cateye CC-TR210DW User Manual - Dutch - 51 pages

Cateye CC-TR210DW User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info