508119
5
Zoom out
Zoom in
Previous page
1/51
Next page
ENG-4
Automatic recognition of the speed sensor ID
The speed sensor has its own ID, and the computer measures in synchronization
with the ID.
Two speed-sensor IDs can be registered to one computer, which can automatically
identify two speed sensors once their IDs are registered in advance.
As a tire circumference is set to the speed sensor ID, wheel selection by manual
operation is no longer required, which was necessary with conventional units.
* The speed sensor currently recognized is indicated with a sensor icon (
or )
on the screen.
Procedure of automatic recognition
When the computer changes to the power saving screen, and then returns to the
measurement screen, automatic recognition of the speed sensor ID is performed
in the following procedure.
1. The computer searches the speed sensor ID signal, which had been synchro-
nized immediately before.
2. Once the sensor signal is received, the sensor icon for the speed sensor lights
up, and the computer starts the measurement.
When the speed sensor ID signal which had been synchronized immediately
before, cannot be received another sensor signal is searched.
3. When the computer receives another sensor signal, the sensor icon for the
other sensor lights up on the screen, and starts the measurement.
When another speed sensor ID signal cannot be received, the original sensor
signal is searched again.
The computer repeats synchronization through the procedure described above
even if it fails in synchronization for some reason, such as communication fail-
ure; in such cases however, it takes time for recognition.
* When any speed sensor signal cannot be received in 5 minutes,
/ is
turned off, and the computer enters the transmission-off status and changes
to the power saving screen after another 5 minutes.
Switching the ID by manual operation
The speed sensor ID can be forced to change manually, according to the menu
screen “Setting the tire circumference” (page 31). Use this operation in the
following cases.
• When the computer cannot recognize the intended sensor signal, since the 2
registered speed sensors are nearby and both are sending a sensor signal.
• When you want to switch the speed sensor ID immediately.
* Once you switch the speed sensor ID by manual operation, the computer con-
tinues to search only the speed sensor ID you switched when returning to the
measurement screen. When the computer cannot receive any sensor signal in
10 minutes, the power-saving mode is activated, and the computer changes
to the power saving screen. The computer searches through the procedure of
automatic recognition when it returns to the measurement screen.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-TR210DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-TR210DW in the language / languages: English as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-TR210DW

Cateye CC-TR210DW User Manual - German - 51 pages

Cateye CC-TR210DW User Manual - Dutch - 51 pages

Cateye CC-TR210DW User Manual - French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info