471843
25
Zoom out
Zoom in
Previous page
1/28
Next page
CC-TR100
4746
CC-TR100
Fluctuation in the heart rate indicator, for example it returns to zero and then the heart rate is
measured again.
Is the electrode pad being worn correctly?
To wear the electrode pad correctly, follow the instructions for wearing the heart rate
sensor (page 14).
Moving the main unit away from your body will prevent measurement of the heart rate.
The battery for the heart rate sensor or the main unit is used up.
Replace it with a new one. Be sure to perform the restarting operation after replacement
(page 11).
Pressing the LIGHT button dims the display.
The remaining battery capacity for the main unit is very weak.
Replace it with a new battery (CR2450) as soon as possible. After replacement, be sure to
perform the restarting operation (page 11), check the heart rate sensor ID, and set the
date and time.
Trouble on operation
Trouble / Check Items / Remedy
Pressing the START/STOP/ENTER button does not start or stop measurement.
Check whether the auto-mode is turned on (with the icon illuminating).
When the
icon illuminates, the auto-mode is on; you cannot start or stop measure-
ment by pressing the button. Turn off the auto-mode. (See Auto-mode on page 30.)
The HR sensor ID failed ([E] is displayed on Display 2)
Is the main unit mounted to the HR receiver ?
It must be mounted to the HR receiver to receive the heart rate sensor signals.
When performing the ID check, is the main unit within 20-80 cm distance of the sensor?
The battery for the heart rate sensor is possibly depleted. After replacing the battery with
a new one (CR2032), check the heart rate sensor ID again (page 38).
Lap data cannot be stored.
Have you already completed 199 laps?
Up to 199 laps can be recorded in the data files.
Reset the computer data, or delete data files that contain several laps in order to obtain
free space for lap recording.
Is the lap time over 100 hours (Or is the trip distance in one interval over 9999.99 km)?
With these values exceeded, the lap cannot be measured.
Is the lap screen currently displayed?
When the lap screen is on - for example, immediately after lap recording or while you are
on the lap data viewing screen.
Cannot perform data storage
Does data file on the menu screen indicate 0% for the remaining memory, or 99 for the
data file number? (See Data file on page 39)
Delete unnecessary data files to increase the remaining memory or decrease the number
of data files.
In menu mode, cannot change settings
Is the computer currently measuring time and/or speed?
Some settings cannot be changed when measurement is in progress Make sure that the
timer and/or speed measurement are stopped (Some menu screens require all data to be
reset).
Trouble shooting
If a malfunction occurs, check the following before contacting CatEye or your retailer for repair
or service.
Trouble on display
Trouble / Check Items / Remedy
Display motion becomes slower.
Is the surrounding temperature low (below zero centigrade/32 farenheit)?
Temperatures below freezing may result in slower screen response.
All numeric characters displayed in two lines on Display-5 flash.
The remaining battery capacity for the main unit is low.
Replace it with a new battery (CR2450) immediately. After replacement, be sure to per-
form the restarting operation (page 11), check the HR sensor ID, and set the date and
time.
No displays appear.
Is the battery for the main unit empty?
Replace it with a new battery (CR2450). After replacement, be sure to perform the re-
starting operation (page 11), check the HR sensor ID, and set the date and time.
Meaningless display appears
Perform the restarting operation (page 11), check the HR sensor ID, and set the date and
time.
Cannot measure the trip speed (Cadence zone)
Check whether the distance between the speed sensor and the magnet is too large. (Ca-
dence zone)
Is the indication line of the speed sensor off the center of the magnet? (Cadence zone)
Adjust the position of the speed sensor and that of the magnet correctly. (See Installing
the unit on your bicycle on page 8.) (Cadence zone)
Check for a break in the wire of the speed and cadence sensors.
Replace the speed/cadence sensor kit with a new one.
Heart rate signals are not received.
Is the main unit mounted to the HR receiver?
It must be mounted to the HR receiver to receive the HR sensor signals.
Has the power-saving function been activated, showing only time on the screen?
Press any other button than RESTART to cancel the power-saving mode.
Has the rubber surface of the electrode pad come off?
Adjust the electrode pad with its rubber surface to be in close contact with the body.
Dry skin (particularly in winter)
Slightly moisten the electrode pad of the heart rate sensor.
Is the battery for the heart rate sensor used up?
Replace it with a new one (CR2032).
Is the battery for the main unit used up?
Replace it with a new one (CR2450). Be sure to perform the restarting operation after
replacement (page 11).
Is the electrode pad overly worn and damaged after long use?
Replace it with a new heart rate sensor.
Abnormal values appear.
Are there any objects emitting electromagnetic waves (railway tracks, transmitting stations
for television, etc.) nearby?
Keep the unit away from any object that may be causing interference, and reset the data.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-TR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-TR100 in the language / languages: English as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info