471845
19
Zoom out
Zoom in
Previous page
1/40
Next page
ENG
FR
19
MODE-
2
START/ENTER
MODE-
1
LAP
M
1
M
2
START/ENTER
MODE-
1
LAP
M
1
M
2
START/ENTER
MODE-
1
LAP
M
1
M
2
Réinitialiser les données
Suivez les directions ci-dessous pour remettre les données
à zéro. Dans chaque cas, la distance totale (odo), le temps
écoulé (ttm), et l'horloge ne seront pas remis à l'état initial.
REMARQUE: Il nest pas possible deffectuer une
réinitialisation à partir de l’écran de tour.
1. Réinitialisation de toutes les données
Pour remettre à l'état initial zéro toutes les données
effaçables dans le principal et le deuxième écran de me-
sure, appuyez simultanément START/ENTER, MODE-1,
et MODE-2.
2.
Remise à l'état initial des données principales de mesure
Pour réinitialiser à zéro toutes les données effaçables uni-
quement sur l’écran de mesure principale, appuyez si-
multanément sur les boutons START/ENTER et MODE-1
alors que l’écran de mesure principale saffiche.
3.
Remise à l'état initial des deuxièmes données de mesure
Pour réinitialiser à zéro toutes les données effaçables
sur le deuxième écran de mesure, appuyez simultané-
ment sur les boutons START/ENTER et MODE-1 alors
que la deuxième icône de mesure saffiche.
Fonction d'économie d'énergie
Lorsque que l'appareil n'a reçu aucun signal pendant environ
10 mn, l'unité principale se met en mode économie d'énergie
dans laquelle seul le temps est indiqué (voir illustration). Quand
lordinateur reçoit un signal du capteur, ou lorsque lon appuie
sur un bouton pour au moins une seconde, laffichage normal
apparaît à nouveau. Si lordinateur ne reçoit pas de signal dans
un délai de 50 minutes après que le système entre dans le
mode permettant d’économiser l’énergie, lordinateur entre
dans le mode SLEEP avec le mot SLEEP apparaissant
(comme indiqué dans lillustration). L'ordinateur peut seule-
ment remettre ses fonctions initiales en appuyant sur n'im-
porte quel bouton pour une seconde.
Resetting operation
Follow the directions below to return data to zero. In each
case, Total Distance (odo). Total Elapsed Time (ttm), and
Clock will not be reset.
NOTE: You cannot perform the resetting operation on the
lap screen.
1. Resetting all measured items of data
To reset to zero all erasable data in main and second
measurement displays, simultaneously press START/
ENTER, MODE-1, and MODE-2.
2. Resetting the main measurement data
To reset to zero all erasable data in main measurement
display only, simultaneously press START/ENTER and
MODE-1 while the main measurement display is on.
3. Resetting the second measurement data
To reset to zero all erasable data in the second measure-
ment display only, simultaneously press START/ENTER
and MODE-1 while the second measurement icon is on.
Power-saving function
When the computer has not received any data for about 10
minutes, the main unit will enter the power-saving mode,
in which only the clock is displayed (as in illustration). When
the computer receives the signal from the sensor, or a but-
ton is pressed for one second, the normal display returns.
When the computer has not received any data for about 50
minutes after entering the power-saving mode, it will enter
the SLEEP mode, with only 'SLEEP' being displayed (as in
the illustration). Press any button for one second to turn
the computer back on.
Main
measurement
Mesure prin-
cipale
Second mea-
surement
Deuxième
mesure
Power-saving state
(after being left alone for
10 minutes)
Économie énergie (après
10 mn d'inactivité)
SLEEP state (after being
left alone for 50 minutes)
SLEEP (après 50 mn
inactivité)
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-HR200DW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-HR200DW in the language / languages: English, French as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-HR200DW

Cateye CC-HR200DW User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info