Manual Cateye CC-GL51 Stealth evo plus (page 42 of 47) (English)

580402

Zoom out

Zoom in

1/47

Introduction

How to install the

unit on your bicycle

Setting up the

computer

How to use the

computer

Setup of your PC

Uploading the

measurement data

Changing the

computer

conﬁguration

Others

Trouble Check Items Remedy

The measurement data

is wrong.

–

If not using an ANT+ sensor ca-

pable of speed measurement, the

unit uses GPS for measurement, so

depending on reception conditions,

measurement may be interrupted

or indicate values other than actual

values.

MEM FULL ﬂashes. Does the maximum re-

cording time or the num-

ber of trips exceed the

upper limit?

* For details, see “Record

interval and capacity

limit” (page 26).

Connect the computer to your PC

to upload the trip data (page 22).

All the trip data transferred to your

PC will be deleted from the com-

puter, and new data will be able to

be recorded.

Does the maximum time

for one trip exceed the up-

per limit?

* For details, see “Record

interval and capacity

limit” (page 26).

Perform the resetting operation

(page 18) to stop the current

trip.

Then, you can record as another

trip.

The backlight does not

light up even at the

preset hour.

Are the start time and end

time set to the same hour?

The backlight does not light up

when the start time and end time

are set to the same hour.

For information on how to set the

start/end time, see “Night-time set-

ting” (when using CATEYE Sync™:

page 30, when using the com-

puter alone: page 38).

Is the start time of the

night-time set correctly?

For information on how to set the

start/end time, see “Night-time set-

ting” (when using CATEYE Sync™:

page 30, when using the com-

puter alone: page 38).

The backlight lights up

during the daytime.

Troubles related to the ANT+ sensor

Refer to the following information when the optional or commercial ANT+ sensor is used.

* Pairing with the computer is required in order to use the ANT+ sensor. For details, see

“Pairing the sensor” (page 36).

* When a commercial ANT+ sensor is used, also refer to the instruction manual supplied

with your sensor.

Trouble Check Items Remedy

The heart rate can-

not be measured (

does not ﬂash).

Did you perform pairing

with the heart rate sensor?

Perform pairing (page 36).

Is the electrode pad de-

tached from your body?

Wear the electrode pad appropri-

ately so that it is in close contact

with the body.

Is your skin dry? Moisten the electrode pad a little.

Is the electrode pad overly

worn and damaged after

long use?

Replace with a new one.

Is the battery for the heart

rate sensor used up?

Replace with new batteries.

The heart rate mea-

surement is not con-

stant (measurement is

performd at times, or

reset to 0).

Is the heart rate sensor

attached correctly?

Attach the heart rate sensor in the

correct position by referring to the

relevant instruction manual.

The power cannot be

measured (

P does

not ﬂash).

Did you perform pairing

with the power sensor

used?

Perform pairing (page 36).

Is the condition for

mounting the power sen-

sor cleared?

Mount the power sensor correctly

by referring to the relevant instruc-

tion manual.

Is the battery for the

power sensor used up?

Replace with new batteries.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-GL51 Stealth evo plus in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-GL51 Stealth evo plus

Cateye CC-GL51 Stealth evo plus User Manual - German - 47 pages

Cateye CC-GL51 Stealth evo plus User Manual - Dutch - 47 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cateye CC-GL51 Stealth evo plus Manual

Product: