602323
5
Zoom out
Zoom in
Previous page
1/33
Next page
5
Introduction
How to install the
unit on your bicycle
How to use the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
Setting up the
computer
Setting up the computer
Perform the following formatting operation, when you use the unit for the first time or re-
store the unit to the condition before shipment.
Caution: All data are deleted, and the computer is reset to the factory default.
* To complete the setting up quickly, press the MENU button twice after the formatting
operation to stop setting up the computer. Then, you can set up quickly using your PC,
by changing the computer configuration using the special software application “CATEYE
Sync™”. For details, see “Changing the computer configuration” (page 23).
1
Format (initialize)
Press the MENU button on the back of the computer and the AC
button simultaneously. Release the MENU button when a test
pattern is displayed on the screen.
MENUMENU
AC
AC
MENUAC
MENUAC
MENUAC
1 2 3
* When all screen items light up without any test pattern dis-
played on the screen, the formatting operation has not been
completed properly.
Perform the formatting operation again.
2
Select the speed unit
Select “km/h” or “m/h”.
MODE
km/h
m/h
MENU
Register the setting
(Back)
Watch video
(YouTube)
Click the button, then a browser will open and a
video will be played back.
How to turn on/off the power / how to charge the battery
Power ON/OFF
Press and hold the button on the back of the computer for 2 seconds.
* Set up the computer when you turn on the power for the first time.
For details, see “Setting up the computer” (on the right of this page).
* When the remaining battery capacity is small, charge it according
to the following instructions.
How to charge
1
Set the computer to the cradle
Caution:
Do not set wet computer to the cradle, for ex-
ample after ride in the rain. It may cause short
circuit and damage the computer or the data.
2
Insert the USB plug in your PC or a commercial
USB battery charger
Once charging is started, only (battery icon) is displayed.
Icon Description
(Animation) Charging
(Light up) Charging is completed
* When the computer is connected to your PC, the battery can-
not be charged with the PC in sleep state.
* With USB1.0, it takes time to charge.
* The battery charges to about 80% after approximately 90 minutes.
* The standard charging time may change according to the
environment for use.
* The computer can be used for 10 hours on a full charge.
(Due to standby current, usage time will become shorter as
time progresses after charging.)
3
Remove the computer after charging is completed
Disconnect the USB plug from your PC or a USB battery char-
ger, and then remove the computer from the cradle.
* To remove the computer, press it out by hand while holding
the cradle.
Standard
charging time
Approx. 5 h
Test pattern
Battery icon
Cradle
Computer
(Press & hold)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-GL11 Stealth evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-GL11 Stealth evo in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-GL11 Stealth evo

Cateye CC-GL11 Stealth evo User Manual - German - 33 pages

Cateye CC-GL11 Stealth evo User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info