508112
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
Changing the
computer con-
figuration
6
Click on [STEALTH] to change the settings.
Before changing the settings, click on [Read] to load the settings of the computer.
Change the settings according to the following procedure.
Setting items Description
Time zone
Select the city code nearest from your current location.
* For details, see
Time zone list
(page 6).
Daylight saving
time
Select whether to use the daylight saving time.
• On : Moves the clock 1 hour ahead.
• Off : Displays in regular clock.
Speed unit Select the speed unit (km/h or m/h).
Night-time set-
ting
Set the time when the backlight lights up.
• Night-time setting ON :
Enter the start time when the backlight lights up.
• Night-time setting OFF :
Enter the end time when the backlight lights off.
(Example) When lighting up from 7:00 pm to 6:00 am
Night-time setting ON : 19
Night-time setting OFF : 6
* When you do not want to turn on the backlight throughout the day,
set the same value for both “Night-time setting ON” and “Night-time
setting OFF”.
Setting items Description
Tire circumference
This is not used with this unit.
Total distance
You can enter the start value of the total distance, and add the trip
distance to it.
(Setting range : 00000 to 99999)
* This can be used when you renew and/or reset the computer.
* Enter the total distance in integer number only.
Sampling interval
Set the record interval of the measurement data.
* The maximum recording time (total time of all trip data) and the
maximum time for one trip depend on the interval selected.
• 1s (at intervals of 1 second) : 35 hours / 12 hours
• 2s (at intervals of 2 seconds) : 70 hours / 24 hours
• 5s (at intervals of 5 seconds) : 175 hours / 60 hours
Clock display
format
Select the display format of
12h
” (12 hours display) or
24h
” (24
hours display).
* Date and clock are acquired from GPS signal; therefore, it is not
necessary to enter them.
7
Click on [Apply].
The changes are reflected to the computer.
Remove the computer from the cradle. Now, changing the computer configuration is
completed.
Delete the data recorded
in the computer.
Read the current settings of the
computer.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-GL10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-GL10 in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cateye CC-GL10

Cateye CC-GL10 User Manual - German - 28 pages

Cateye CC-GL10 User Manual - Dutch - 28 pages

Cateye CC-GL10 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info