471847
2
Zoom out
Zoom in
Previous page
1/2
Next page
Operation of Computer
Speed Scale Indicator - “mph” or “km/h” on main display flashes
when computer is measuring speed.
Display Modes - Press MODE button to shift lower display from
one mode to the next. The display modes change from Elapsed
Time (Tm), to Average Speed (Av), to Maximum Speed (Mx), to
Total Odometer (Odo), to Trip Distance (Dst).
CLOCK TIME - Hold MODE button for 2 seconds to display Clock
Time (this works in any of the display modes).
[
To set correct Clock Time, press SET button when Clock Time is
showing in lower display. Use MODE button to increase the digit
number, and press SET to change to next digit. Press SET button
when complete].
AUTO TIME
- When this is activated, the computer will auto-
matically start and stop measuring Elapsed Time (Tm), Average
Speed (Av), and Trip Distance (Dst), as soon as the bike starts
moving. AUTO TIME is activated when
icon shows in main
display.
To turn feature on or off, press SET button while lower display
is in Elapsed Time (Tm), Average Speed (Av), or Trip Distance (Dst)
mode. For best results, operate the computer with
activated.
MANUAL MODE - Press the START/STOP button to start the
Elapsed Time (Tm), Average Speed (Av) and Trip Distance (Dst)
measurement, ONLY IF AUTO TIME
is not activated.
Reset Time, Distance, Average - To reset (zero out) ride data
(Elapsed Time, Trip Distance, Average Speed, and Max. Speed),
press MODE and START/STOP simultaneously. [Total Odometer is
not reset].
Computer Features
Power Saving Function:
Power saving mode ------- No signal for 10 minutes.
•Sleep mode ----------------- No signal for 2 weeks.
•Wake mode ----------------- Press MODE or START/STOP button.
Dual tire size:
•Two different wheel size can be programed.
Press MODE and START/STOP simultaneously for 2 seconds to switch size
and .
•Wheel size
is designed for road bikes. Wheel size is designed for slower speeds
that can be typical for mountain bikes.
Troubleshooting
No display.
The battery in the computer run down?
Replace it with a new one and do all clear operation.
Incorrect data appears.
Do all clear operation. (Before this operation, write down your Odo data, and input it again after all
clear operation. In this way you can continue to accumulate your Odo.)
Cannot start measuring by START/STOP button.
Is the
icon on?
To operate manually, switch off the Auto Time.
Sensor pulse indicator does not flash. (Current speed does not appear.)
[If the sensor pulse indicator fails to flash, first spin front wheel to align computer with sensor. Indicator
will flash if computer is working. If not, this will pinpoint the problem to be: 1. dead battery; 2. distance
between sensor and unit is over 70cm.]
Is the clearance between the sensor and the magnet too large?
Are the magnet's center and the sensor's marking line aligned?
Re-adjust the positions of the magnet and the sensor.
Is the distance between the computer and the sensor too long?
Adjust the sensor's position so that the distance becomes less than 70cm.
The battery in the sensor run down?
Replace it with a new one. *In winter, battery's performance is degraded.
The battery in the computer run down?
Replace it with a new one and do all clear operation.
Specification
Battery ------------------------------ Computer: Lithium Battery CR2032 X 1
Sensor: Lithium Battery CR2032 X 1
Battery Life ------------------------- Computer: approx. 1 year (in the case of being used for 1 hour every day)
Sensor: until Total Distance reaches about 10,000km (6,250mile)
*This is the average figure of being used under 20°C temperature and the dis
tance between the computer and the sensor is 65cm.
Controller -------------------------- 4-bit 1-chip microcomputer (crystal controlled oscillator)
Display ----------------------------- Liquid crystal display
Sensor ------------------------------ No contact magnetic sensor
Wheel Circumference Range ---- 10mm-2999mm (default figure: A: 2095mm, B: 2050mm)
Working Temperature ------------ 0°C - 40°C (32°F - 104°F)
Dimension/Weight ---------------- 1-19/32 x 2-7/32 x 27/32" (40 x 56.5 x 21mm) / 1.06oz (30g)
* The factory-loaded battery life might be shorter than the above-mentioned specification.
* The specifications and design are subject to change without notice.
Maintenance
To clean the computer or accessories, use diluted neutral detergent on
a soft cloth, and then wipe it off with a dry cloth.
If the gaps between the buttons and the unit get clogged with mud or
sand, wash with water.
Replacing Battery
Computer
If the screen gets dim, please replace the battery. (Before replacing bat-
tery, write down your Odo data, and input it again after all clear operation.
This way you can retain your Odo data and continue to count, even after
replacing the battery.)
Insert a new lithium battery (CR2032) with the (+) mark facing up.
•After replacing battery, do all clear operation and set up the unit again.
Sensor
If the sensor pulse symbol on the display gets dim, please replace the
battery. After replacing the battery, check the position of the sensor and
magnet again.
Limited Warranty
2-year warranty for computer/sensor only (excluding parts and batteries)
If trouble or damage occurs during normal use, the product will be repaired or replaced free of charge. Type your
name, address, date of purchase and the situation of trouble clearly on the warranty certificate, and send it back
to the appropriate service center together with the product. Insurance, handling and transportation charges shall
be borne by the customer. After being repaired or replaced, the product will be shipped back to the customer.
2-8-25, Kuwazu, Higashi Sumiyoshi-ku, Osaka 546-0041 Japan
Attn.: CAT EYE Customer Service Section
Service & Research Address for United States Consumers:
CAT EYE Service & Research Center
1705 14th St. 115 Boulder, CO 80302
Phone: 303-443-4595 Toll Free: 800-5CATEYE
Fax: 303-473-0006 e-mail: service@cateye.com
URL: http://www.cateye.com
The following parts are available.
#169-6693 #169-6673
Sensor
#169-6663
Bracket Kit
#169-6773
Attachment Kit
#169-6667
Center
Mount Kit
#169-6669
Stem Mount Kit
#169-9691
Magnet
#166-5150
Lithium Battery (CR2032)
#169-9760
Magnet for Composite
Wheel
#169-9690
Hi-Power Wheel
Magnet
Optional Parts Standard Parts
Parts Kit
SET
Tm
Av
Dst
ST./STOP
MODE
Display Features
How Mode Shifts in Lower Display
How to Change Wheel Circumference
Power Saving Function
(When the unit doesn't receive signal for ten minutes,
it enters into power saving mode.)
Press simultaneously
2 seconds
Hold down 2 seconds
Increases
figure
Decreases
figure
Increases
figure
Decreases
figure
Av
Average Speed
0.0-105.9 km/h
[0.0-65.9 mph]
Odo
Total Distance
0.0-99999 km [mile]
Mx
Maximum Speed
0.0(4.0)-105.9 km/h
[0.0(3.0)-65.9 mph]
Dst
Trip Distance
0.00-999.99 km [mile]
Tm
Elapsed Time
0:00'00"-9:59'59"
Clock
0:00-23:59
[1:00-12:59]
Default figure
Wheel A: 2096
Wheel B: 2050
From any mode
Returns to
above mode
2 weeks
later
Hold
down
2 seconds
No signal
10 minuets
In
Odo
In any functions
other than
Odo
Road
Racer
MTB
Sleep Mode
To wake up the unit,
press MODE button or
ST./STOP button.
Power Saving Mode
When wheel starts rotating,
it returns to normal mode.
How to Adjust Clock
If Km/h is selected for speed scale, it becomes 24-hour
clock. If mph is selected, it becomes 12-hour clock.
Road
Racer
MTB
Press simultaneously
Dual Tire Size
You can set 2
different wheel
circumferences
How to Switch Wheel and
Pressing MODE and ST./STOP button simultaneously for a few
seconds in Mx mode, the computer will go to sleep mode.
Speed
(upper display)
0.0(4.0)-105.9 km/h
[0.0(3.0)-65.9 mph]
Sensor Pulse Indicator
Flashes in synchronization with
signal from sensor.
Auto Time Icon
Starts/stops measuring
automatically.
Wheel Icon
Shows which
wheel is selected
If Elapsed Time exceeds 27 hours or Trip
Distance exceeds 999.99km, Average
Speed shows E. and ceases calculation.
ST./STOP
MODE
MODE
MODE
ST./STOP
MODE
ST./STOP
MODE
MODE
SET
SET
SET
SET
ST./STOP
MODE
SET
Speed Scale Indicator
Press SET button in
Tm, Av or Dst
Start/Stop
Close
Open
Close
Open
CO
.,LTD.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-FR7CL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-FR7CL in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info