649082
29
Zoom out
Zoom in
Previous page
1/34
Next page
688217 nl en ma 2016
29
ENGLISH
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset , just repeat the above steps.
3. If press
at the last step, it will turn back to Ready Mode. The setting will be no use.
13. Double/Triple Quantity cooking
1. If the "X2" or "X3" button is pressed in Ready Mode, followed by the starting of a Preset Program,
or if the "X2" or "X3" button is pressed in 5 seconds of starting a Preset Program,
the oven will start cooking with the quantity preset cooking time.
2. Press "X2", "DOUBLE" displays. Press "X3", TRIPLE displays.
When press number buttons, the screen will display the quantity preset time.
For example, number button "5" and its preset time is 1 minute.
Then press "X2", then time will change to 1:00*2=2 (2 minutes).
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
14. Stage Cooking Programming
This allows the user to cook food items at manual cook mode and programming mode.
1. Three stages can be set at most under cooking mode or programming mode. After setting the power
and time for the first stage, press "Time Entry" to set the second stage.
And the same step to set the third stage.
2. When setting the second, third stage, press "Time Entry", "STAGE 2", "STAGE 3" displays.
3. Press
button to start cooking.
Example: In programming mode, press number buttons "3" to set two stages cooking.
The first stage is PL7 and time is 1 minute 25 seconds.
The second stage is PL5 and 5 minutes and 40 seconds. The steps are follow.
a. Open the door ,press number button "1" for 5 seconds, "PROGRAM" displays.
b. Press number button "3", the screen will display "P:03",After two seconds,
the screen will display the related time "00:30".
c. Press "1", "2", "5" to input the cooking time. "01:25" displays.
d. Press "Med-Hi 70%", "1:25 70" displays. The first stage is finished.
e. Press "Time Entry", "STAGE 2" displays.
f. Press "5", "4", "0" button, "5:40" displays.
g. Press "Medium 50%", "5:40 50" displays. The second stage is finished.
h. Press
button to start cooking.
i. The total time counts down.
15. Filter Cleaning Function
1. If User Option OP:01 is selected and the setting time arrives,
the oven will remind the user to cleaning the filter.
Note: The oven must be electrified.
2. The screen will display "CLEAN FILTER". At this time, pressing
button or opening the door will put
the oven into Ready Mode.
3. If you do not need to clean the filter, press
button and hold for 3 seconds to clear out the reminder
information. Otherwise, the oven will remind you all the time during Idle Mode.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caterchef 688.217 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caterchef 688.217 in the language / languages: English, Dutch as an attachment in your email.

The manual is 6,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info