646166
5
Zoom out
Zoom in
Previous page
1/10
Next page
- 5 -
III. User Manual
1). Please put suitable cookware onto the plate of induction cooker, and connect the plug to suitable
socket. After connected, the light of Power will shine, indicating that the power is connected
normally.
2). Pressing , the light of Heating will shine, indicating that the induction cooker is entering the
state of heating; the default power of heating is 6. Adjust the power rate from 1-15 by turning the
knob.
3). By pressing the HEAT/KEEP button can you change between temperature and capacity. The
concerned light will burn. You can adjust the temperature from 60°C up to 220°C by turning
the knob. The maximum temperature of the glass plate is 220°C, by overheating the induction
cooker will shut off automatically.
4). Adjust the time from 0 minute to 120 minutes by “+” or “
” at the state of Time.
5). When pressing during the working State, the induction cooker will stop working immediately.
After stopping working, the fan will cool down the induction cooker for one minute, and then will
be off.
6). The induction cooker will shut off automatically if there is no any operation within 2 hours.
IV. Usable and Non-usable Utensils
1). Usable Pans:
Steel or cast iron, enameled iron, stainless steel, at-bottom pans / pots with diameter
from 12 to 26cm.
Enameled Iron Iron or Enameled Castiron Pan Iron Pot Deep-Fry Pan Stainless Steel Pot Iron Plate
Pot Iron Pot
2). Non-usable Pans:
Heat-resistant glass, ceramic container, copper, aluminum pans/pots.
Rounded-bottom pans/pots with bottom measuring less than 12cm.
Rounded Bottom Aluminum Bottom Measuring Pot with Stands Ceramic Pot Heat-Resistant
Pot Copper Pot Less than 12cm Glass Pot
V. Cleaning
1). Unplug and wait until the cooker is cooled down completely.
Clean the cooker after using each time.
2). If the pots/pans are used without being cleaned, discoloration or stains may occur.
3). Do not use gas, thinner, scrubbing brush or polishing powder to clean the induction cooker.
4). Wipe using dish washing agent and damp cloth.
5). Use a vacuum cleaner to suck out dirt from the air intake and exhaust vent.
6). Never run water over the machine (water getting inside may cause malfunction).
ENGLISH
5


Need help? Post your question in this forum.

Forumrules
1

Forum

caterchef-688.066

Reset search

  • Just bought a Caterchef model 688.066 and when connected to power the on led lights, after pressing it on it starts beeping continously and after maybe 30 seconds it shuts off. The heat window turns on I can swith beteen HEAT/KEEP and adjust timer etc but it doesn't warm up and after the 30 secs shuts off
    I tried in different 220V outlets and it does the same thing. Submitted on 22-12-2021 at 18:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caterchef 688.066 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caterchef 688.066 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info