26
• Do not leave this device and charger in a place with an extreme high or low temperature. Otherwise, they
may not function properly and may lead to a fire or an explosion. When the temperature is lower than 0°C,
performance of the battery will be affected.
• Do not place sharp metal objects such as pins near the earpiece. The earpiece may attract these objects and
hurt you.
• Before cleaning or maintaining this device, power it off and disconnect from the charger.
• Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to clean
the device and the charger. Otherwise, parts of the device may be damaged or a fire can be caused. The device
can be cleaned with a soft antistatic cloth.
• Do not dismantle the device or accessories. Otherwise, the warranty of the device and accessories will be
invalided and the manufacturer is not liable to pay for the damage.
• If the device screen is broken by colliding with hard objects, do not touch or try to remove the broken part.
In this case, stop using the device immediately, and contact an authorised service centre.
PREVENTION OF HEARING LOSS
To prevent possible hearing damage, do not listen at high volume levels for long periods.
CE SAR COMPLIANCE
This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to
electromagnetic fields by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientific organizations through regular
and thorough evaluations of scientific studies. The unit of measurement for the European Council’s
recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is 2.0 W/ kg
averaged over 10 gram of tissue. It meets the requirements of the International Commission on Non-Ionizing
Radiation Protection (ICNIRP).
For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the
European Standard EN 62209-2, for use with dedicated accessories. Use of other accessories which contain
metals may not ensure compliance with ICNIRP exposure guidelines.
SAR is measured with the device at a separation of 5 mm to the body, while transmitting at the highest
certified output power level in all of the device’s frequency bands.
The highest reported SAR values under the CE regulatory for the phone are listed below:
Head SAR: 1.164 W/kg, Body SAR: 1.353 W/kg
To reduce exposure to RF energy, use a hands-free accessory or other, similar options to keep this device away
from your head and body. The device must be carried 5mm from the body to ensure exposure levels remain at
