601907
17
Zoom out
Zoom in
Previous page
1/66
Next page
15
the back of the car (fig. 12).
Place the child in the PROTECTOR FIX seat (see illustrations 14 - 17)
Adjust the headrest to its maximum height (fig. 14 - 15) and pass the diagonal part of the
belt through the headrest runner. Re-adjust the headrest to the appropriate position for
the height of the child.
• Fasten the seat belt by passing it over the PROTECTOR FIX so that the lap strap is as
low as possible and the diagonal strap holds the child firmly (fig. 16).
• Fasten the belt and check that the lap strap is underneath both arm rests (area marked
in red) and the diagonal strap is above the arm rest next to the buckle (fig. 17). Adjust
the height of the headrest so that the diagonal strap of the car seat belt passes over the
chest of the child and not across his/her neck.
Adjusting the PROTECTOR FIX height (see illustrations 18 - 19)
• The PROTECTOR FIX is height adjustable to adapt to the growth of the child (fig. 18).
Once it is fitted in the car with the child, adjust the height of the PROTECTOR FIX so that
the belt never goes across the child’s neck.
• Press the button behind the top of the headrest to adjust its height (fig. 19).
Adjusting the PROTECTOR FIX base (see illustrations 20 - 21)
• The base of the PROTECTOR FIX is adjustable according to the growth of the child.
• When seated inside, adjust the base according to the length of the child’s legs.
• Turn the selector knob to the left (fig. 20) and move to modify the length of the base
according to the legs of the child (fig. 21).
Adjusting the PROTECTOR FIX recline (see illustrations 22 - 23)
• The back of the PROTECTOR FIX has a reclining adjustment to suit the requirements of
the moment. If the child falls asleep or wants to adopt a more relaxed position, increase the
recline of the PROTECTOR FIX seat.
• Turn the selector knob towards the right (fig. 22) and move the seat towards the desired
position (fig. 23).
Removing the PROTECTOR FIX from the car (see illustration 24)
• Release the seat belt buckle in the vehicle, loosen it and remove it from the runner.
• Remove the child from the PROTECTOR FIX seat.
• Release the connectors on both sides (a red signal will appear) (fig 24).
• Detach the safety seat from the car seat.
Dismantling the PROTECTOR FIX (see illustrations 25 - 26)
• To dismantle the PROTECTOR FIX seat, press the button located on the lower part of the
back section (fig. 25) and pull the back section away from the seat section (fig. 26).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casualplay Protector Fix at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casualplay Protector Fix in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info