601905
24
Zoom out
Zoom in
Previous page
1/90
Next page
22
Installing the Baby 0
+
SAFE TECH
WARNING: Do not install the child restraint system on front seats tted with a
frontal AIRBAG, without disconnecting it rst.
The Baby 0
+
SAFE TECH must always be tted facing backwards, with the child facing
the back of the car (g.13).
Position the Baby 0
+
SAFE TECH on the vehicle seat so that the child is facing the back
of the car.
Put the handle in the installing in the car position and make sure that it clicks into place
when it reaches the position.
Pull, carefully, the seat belt and pass it over the Baby 0
+
SAFE TECH. The abdominal
must go under the handle. Fasten the seat belt, and pass the abdominal part of the belt
through the two corresponding guides (1) (coloured blue) (g.14).
Pass the diagonal part of the belt behind the Baby 0
+
SAFE TECH (g.15).
Put the belt in the corresponding guide (coloured blue). Hold the Baby 0
+
SAFE TECH
rmly and pull the diagonal part of the belt to tighten it (g.16).
Removing the Baby 0
+
SAFE TECH
Take the diagonal part of the belt out of the fork (coloured blue).
Unfasten the belt and take it out of the guides of the abdominal part taking care to keep
the belt away from the child.
Before taking the Baby 0
+
SAFE TECH out of the car, move the handle to the carrying
position. Make sure that the handle clicks locked into place.
Installing the Baby 0
+
SAFE TECH on the BASE FIX Baby 0
+
SAFE TECH
NOTE: The Baby 0
+
SAFE TECH (depending on the model) can be installed in the
vehicle using the Base x
Baby 0
+
SAFE TECH, which is sold separately.
NOTE: Before purchasing the Base x
Baby 0
+
SAFE TECH check that your Baby
0+ SAFE TECH is tted with the release device found on the backrest.
Set the handle of the Baby 0
+
SAFE TECH to the carrying position (g.5) (C).
Position the Baby 0
+
SAFE TECH facing backwards, place it on the fastening points of
the base.
Press the Baby 0
+
SAFE TECH against the base, you will hear it click and two green
indicators will appear on the front part of the base (g.17).
Check that it is correctly fastened onto the base by pulling the Baby 0
+
SAFE TECH
upwards.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casualplay Baby at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casualplay Baby in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info