667704
50
Zoom out
Zoom in
Previous page
1/184
Next page
50
ENGLISH
EN
1 GENERAL
This symbol indicates WARNING.
Serious personal injury and/or damage
to property may result if the
instructions are not followed carefully.
You must read these instructions for
use and the accompanying pamphlet
“SAFETY INSTRUCTIONS”
carefully, before starting up the
machine.
1.1 SYMBOLS
The following symbols appear on the machine.
They are there to remind you of the care and
attention required during use and maintenance.
This is what the symbols mean:
Warni ng!
Read the instruction manual and the safety
manual before using the machine.
Warni ng!
Watch out for discarded objects. Keep
onlookers away.
Warni ng!
Always wear hearing protectors.
Warni ng!
This machine is not designed to be driven
on public roads.
Warni ng!
The machine must not be driven in any
direction on slopes with a gradient greater
than 10º.
Warni ng!
Risk of burn injuries. Do not touch the
silencer/catalytic converter.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are
numbered 1, 2, 3, etc.
Components shown in the figures are marked A, B,
C, etc.
A reference to component C in figure 2 is written
as follows:
“See fig. 2:C.” or simply “(2:C)”
1.2.2 Headings
The headings in these instructions for use are
numbered in accordance with the following
example:
“1.3.1 General safety check” is a subheading to
“1.3 Safety checks” and is included under this
heading.
When referring to headings, only the number of the
heading is normally specified. E.g. “See 1.3.1”.
2 ASSEMBLY
To avoid injury and damage to people
and property, do not use the machine
until all the measures in this instruction
have been carried out..
2.1 ASSEMBLY COMPONENTS
Components that are to be used at assembly are
included in the delivery. See fig. 1.
Supplied in bag:
Pos No. Designation Dimension
A1 Towing plate
B 2 Screw with flange 8 x 20
C 2 Screw for battery
D2 Nut for battery
E 4 Washer 8.4 x 24 x 2.0
F2Shoulder washer
G 4 Screw 8 x 20
H 2 Screw knob
I 2 Ignition key
J 1 Tension pin 6 x 36
K 1 Shim washer 16 x 38 x 0.5
L 1 Shim washer 16 x 38 x 1.0
P 2 Screw M10 x 35
Q2 Nut M10
Supplied installed on the front axles:
Pos No. Designation
M2 Circlip
N 2 Washer with internal lug
Secured to the implement lifter:
Pos No. Designation
O 2 Deck mount
2.2 ENGINE CASING
To fill with fuel and to inspect and maintain the
engine and battery, open the engine casing.
The engine must not be running when
the casing is opened.
2.2.1 Opening
1. Ensure that the control arms are in their forward
positions.
2. Raise the seat lock (2:S) and fold the seat
forwards.
3. Grasp the front edge of the engine casing and
fold up the casing (fig. 3).
2.2.2 Closing
Grasp the front edge of the engine casing and fold
down the casing (fig. 3).
The machine may not be operated
unless the engine casing is folded down.
Risk of burns and crushing injuries.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Castelgarden XM 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Castelgarden XM 130 in the language / languages: All languages as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info