336115
15
Zoom out
Zoom in
Previous page
1/35
Next page
15
Operating the device
The inductions cooker has two hotplates which can be used separately. Therefore you have
two operating panels.
Plug the power plug into a suitable outlet.
The control lamp of the ON/OFF switch lights up and an acoustic signal
sounds.
Now the device is in standby mode.
Place suitable cookware in the centre of the hotplate.
Now press the ON/OFF switch 1. to turn on of the two induction hotplates on. The
control lamp "Stage" blinks and an acoustic signal sounds.
Press the Function Key 3. The preset power stage "5" is selected and the device turns on.
With the + / - Keys (5+6), you can change the settings at any time in a range from 1 – 10
Press the Function Key 2. to select the temperature. The preset temperature stage "120°C" is
selected and the device turns on.
With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
Timer Function. After the selection of the temperature mode press the button Time 4. until
the corresponding control lamps blink. The display shows the number "0". With the arrow
keys, you can now select the operating time in 1-minute intervals (up to max. 180
minutes). Once the time is up, an acoustic signal sounds and the device automatically
goes into standby mode. Notice:
during timer operation, you can change the duration at
any time with the arrow keys. With the memory function of the device, the power stage or
temperature settings remain unchanged here.
You can also change to the power stage selection or the temperature stage selection with
the "Function" button and change the settings there without changing the preset time.
Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
Do not operate the device if it is damaged in any way or does not function properly.
The use of accessories and spare parts not recommended by the manufacturer may lead
to damage on the device and injuries.
In case of “E05” appearing in the display the over heat protection has been activated.
This means that the temperature had increased to a temperature of 170°C. In this case the
device turns off automatically in order to avoid damages.
Therefore we recommend to select the function “Stufe” in case of steaming food or boiling
water for example.
In case of grilling or cooking deep fry food we would advise you to use the function
“Temperatur” as in this case you can use temperatures up to 240°C.
In case of “E05” please pull the power plug in order to reset the device. After this you can use
it again as usual.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caso comfort 3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caso comfort 3400 in the language / languages: German as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info