336114
13
Zoom out
Zoom in
Previous page
1/35
Next page
13
Installing the device
Place the device on a stable and level surface.
Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
Do not block the ventilation slots of the device. This may overheat the device. Keep a
minimum distance of 5 to 10 cm to walls or other items.
Do not place the induction hotplate next to devices or objects, which react sensitively to
magnetic fields (e.g. radios, TVs, cassette recorders, etc.).
Do not place induction hotplates next to open fires, heaters or other sources of heat.
The induction cook top is not suitable for installation into other units.
Make sure that the mains connection cable is not damaged or squashed beneath the
device.
Make sure that the mains connection cable does not come into contact with sharp edges
and/or hot surfaces.
The device should be connected to a rolled-out extension cable with a maximum length of
3 m and a cross-section of 2 mm. If an intermediate switch is used, it must be rated at min.
16 A.
"The appliance is not intended to be operated by means of an external timer or separate
remote control system."
Commissioning the device
Prior to connecting the device, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to grave
damage on the device and injury to persons.
The two hotplate surfaces consist of temperature-resistant ceramics. In case of damage,
even if this concern only a small tear, disconnect the device from the power supply
immediately and contact the customer service.
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other
metal objects on the hotplate. These may heat up when the device is turned on.
Place the hot pans in the hob area only. Never place them on the control panel or the
frame. Even do not push the pot over the control panel or the frame.
Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
On order to avoid overheating, do not place any aluminium foil or metal plates on the device.
Warning: Please do not put the induction cooker on an iron/steel board, while operating.
Due to electromagnetic reason, the iron/steel board may heat and damage the bottom of the
induction cooker.
Do not insert any objects like wires or tools into the ventilation slots. Attention: this may cause
electric shocks.
Do not touch the hot surface of the ceramic field. Please note: the induction hotplate does
not heat up itself during cooking, but the temperature of the cookware heats up the hotplate!
If you do not use the device for an extended period, we recommend you disconnect it
from the electric outlet.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caso comfort 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caso comfort 2000 in the language / languages: German as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info