Manual Caso AF200 - 3176 (page 30 of 97) (English, German, Dutch, French, Italian, Spanish)

653547

Zoom out

Zoom in

1/97

caso AF200 30

12.3 Setup location requirements

In order to ensure the safe and trouble-free operation of the device, the setup location

must fulfil the following prerequisites:

 The device must be set up on a firm, flat, horizontal and heat resistant surface with

sufficient load-bearing capacity for the device.

 Choose the setup location in such a way that children cannot reach the device.

 The device is not intended to be installed in a wall or a built-in cupboard.

 Do not set up the device in a hot, wet or extremely damp environment or near

flammable material.

 The device requires an adequate flow of air in order to operate correctly. Leave a

clearance of 15 cm on all sides.

 Do not cover up any openings on the device and do not block these off.

 Do not remove the device’s adjustable feet.

 The electrical socket must be easily accessible so that the power lead can be

disconnected easily, in the case of an emergency.

 The installation and assembly of this device in non-stationary setup locations (e.g. on

ships) must be carried out by specialist companies / electricians, provided they

guarantee the prerequisites for the safe use of this device.

12.4 Unpacking

To unpack the device, proceed as follows:

 Place the box containing the unit on a countertop or table.

 Remove the device from the box and remove the outer packaging.

 Remove all the stickers or labels (except for the rating plate!).

Disposal of the packaging

The packaging protects the device against damages during transit. The packaging

materials are selected in accordance with environmentally compatible and recycling-

related points of view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and reduces the

quantities of accumulated waste. Take any packaging materials that are no longer required

to “Green Dot” recycling collection points for disposal.

Please note

► If possible, keep the original packaging for the device for the duration of the guarantee

period of the device, in order that the device can be re-packaged properly in the event

of a guarantee claim.

12.5 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the following

instructions must be observed for the electrical connection:

 Before connecting the device, compare the connection data (voltage and frequency) on

the rating plate with those of your electrical network. This data must agree in order that

no damages occur in the device. If in doubt, ask your qualified electrician.

 The electrical outlet must be protected by a 16A safety cut-out switch.

Do not use an extension lead. If you accept liability for doing so, only use an extension

lead which is in good condition and is suited to the power of the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Caso AF200 - 3176 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Caso AF200 - 3176 Manual

Product: