586845
12
Zoom out
Zoom in
Previous page
1/24
Next page
EN-10
General Guide
Turning Power On or Off
1.
Hold down the P (Power) button until figures
appear on the display. This indicates that
power is on.
2.
To turn off power, hold down the
P (Power) button until the display
goes blank.
NOTE
Turning off power puts TRACKFORMER into a
standby state. Minute amounts of current continue to
flow within TRACKFORMER in the standby state. If
you do not plan to use the product for a long time or if
there is a chance of a lightning storm in your area, be
sure to unplug the AC adaptor from the wall outlet.
Under initial factory default settings, turning on
power automatically returns TRACKFORMER
settings to what they were the last time you turned it
off (AUTO RESUME). You can disable the AUTO
RESUME setting if you want. For more information,
refer to the separate User’s Guide (Tutorial).
Auto Power Off
TRACKFORMER turns off automatically to avoid
wasting power if no operation is performed for a preset
amount of time. Auto Power Off trigger times are
shown below.
z Battery-powered operation
Approximately 6 minutes
z AC adaptor-powered operation
Approximately 4 hours
NOTE
You can disable Auto Power Off if you want. For
more information, refer to the separate User’s Guide
(Tutorial).
You can use any one of the three operations shown
below to change a sequence data number or a pad tone.
While holding down the button for the function whose
setting you want to change, perform one of the
operations below. For example, if you want to change
the sequence, hold down the selector panel’s S EQ
button and then perform one of the operations below.
z Press pad 11 () or pad 12 (+).
z Use pads 1 through 10 to input the value you want.
Example: To select sequence data 010, input 010.
z Rotate the VALUE knob.
NOTE
When inputting a value with pads 1 through 10, you
can press pad 15 (DEL) to delete the last digit you
input.
In this manual, all of the procedures use pads 11 ()
and 12 (+) for value input.
Perform the procedure below to return the
TRACKFORMER system (sequence data, settings, etc.)
to its initial factory default state.
1.
Press the P (Power) button to turn off
power.
2.
While holding down pad 4 and the BANK
selector button, press P (Power) to turn on
power.
This initializes TRACKFORMER.
Changing Number and Value
Settings
Returning TRACKFORMER to
Initial Factory Defaults
1
1
2
XWPD1-ES-1A.indd 12 2014/12/25 11:44:35
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XW-PD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XW-PD1 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XW-PD1

Casio XW-PD1 User Manual - German - 24 pages

Casio XW-PD1 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info