585756
39
Zoom out
Zoom in
Previous page
1/96
Next page
Selecting and Creating Tones
E-37
2.
To change the pitch in octave steps, use the
br
OCTAVE minus (–) and plus (+) buttons
(without holding down
br
TRANSPOSE).
The setting range for this operation is three octaves
upwards and downwards (–3 octaves to +3 octaves).
While the setting screen shown above is displayed you can
the
bo
dial or the
bq
minus (–) or plus (+) buttons to
change the setting. If you do not perform any operation for
a while, the setting screen will be exited automatically.
You can apply reverb, vibrato, and other effects to notes to
enhance their sound.
Effect Block Diagram
* When a tone with DSP (tone that uses a particular DSP)
that is not a Solo Synthesizer tone is selected. A tone with
DSP will have “DSP” next to its display name on the mixer
screen (page E-67) or performance editing screen (page
E-64).
Chorus and DSP Use Restrictions
Only one of the three effect types (Chorus, Normal DSP, Solo
Synthesizer DSP) can be enabled at any time.
br
Applying Effects to Notes
Sound
Source
(5) Master
Equalizer
Goes through (2), (3),
or (4). Also refer to
the “Chorus and DSP
Use Restrictions”
below.
Output
(1) Reverb
(2) Chorus
(3) Normal DSP
(4) Solo
Synthesizer
DSP
(1) Reverb Adds reverberation to make it sound like
you are playing in a room or in a hall.
(2) Chorus Combines multiple layers of the same note
to create a sound with more depth.
(3) Normal
DSP
A collection of versatile Normal DSP
effects help to enhance the sound of tones.
For example, distortion can be applied to
an electric guitar sound to make it sound
more powerful. There are 46 different
Normal DSP types, and the most
appropriate one for the selected tone is
applied automatically.
*
A DSP can be
edited and saved as a user DSP.
(4) Solo
Synthesizer
DSP
One of the elements that makes up a Solo
Synthesizer tones. See “(7) Total Block” in
the “Editable Solo Synthesizer Tone
Parameters” on page E-22. There are six
Solo Synthesizer DSP types. When you
edit a Solo Synthesizer DSP, it is saved as
part of a Solo Synthesizer user tone. You
cannot save it as a user DSP.
(5) Master
Equalizer
Adjusts the frequency characteristics of the
Synthesizer’s notes. The Master Equalizer
can be used to adjust the frequency and
gain of four frequency bands: low, mid1,
mid2, and high.
Under this condition:
This type of
effect is valid:
And effects are
applied to each
part like this:
Chorus Mode
A tone other than
the Song Sequencer
is selected by Zone
Part 1, and the
Chorus is selected
by “Chorus/DSP
Select” (page E-38).
(2) Chorus Depends on the
mixer chorus
send value
(page E-68) and
the selected
tone chorus
send value
(page E-29).
Normal DSP Mode
A tone other than
the Song Sequencer
is selected by Zone
Part 1, and the DSP
is selected by
“Chorus/DSP
Select” (page E-38).
(3) Normal DSP (3) is applied
only to parts
whose mixer
DSP line (page
E-68) is on.
Solo Synthesizer Tone
Mode
Solo Synthesizer
tone selected by
Zone Part 1.
(4) Solo
Synthesizer
DSP
(4) is applied
only to Zone
Part 1 and parts
whose mixer
DSP line is on.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XW-P1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XW-P1 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XW-P1

Casio XW-P1 User Manual - German - 95 pages

Casio XW-P1 User Manual - Dutch - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info