585756
25
Zoom out
Zoom in
Previous page
1/96
Next page
Selecting and Creating Tones
E-23
Description
(1) Synthesizer OSC1 Block
“OSC” is an abbreviation of “oscillator”, which is where a sound is actually produced. These two
synth OSC blocks creates sound using a sine wave, sawtooth wave, or other base waveform,
just like an analog synthesizer.
Synth OSC: Generates the base sound and determines the pitch.
Filter: Cuts some of the frequencies to adjust timbre.
Amp: Adjusts volume.
Three EG (envelope generators):
Control changes in pitch, timbre, volume, and other parameters over time.
The nearby illustration shows an example of a volume envelope.
(2) Synthesizer OSC2 Block
(3) PCM OSC1 Block
This block creates sound based on PCM sounds (same sound quality as sounds in the PCM
Tone category). For information about show the editable parameters of this block differ from
those for the OSC blocks above, see “Editable Parameters of Blocks (1) through (6)” (page
E-24).
(4) PCM OSC2 Block
(5) External Input Sound Block
Instead of an oscillator, this block creates sound based on sound input through the
Synthesizer’s
ck
MIC IN and INST IN jacks. The pitch change range of sound produced by
this block is limited.
(6) Noise Block
Instead of an oscillator, this block creates sound based on noise generated by a special noise
generator. The pitch of sound produced by this block cannot be edited.
(7) Total Block
This block combines signals (1) through (6) and sends the completed tone to the filters and
DSP (a type of effect).
(8) LFO1 Block
“LFO” is an abbreviation of “low-frequency oscillator”. The LFOs send waveform information to
each block that is used as the basis for modulation, tremolo and other reverb effects.
(9) LFO2 Block
(10) Controllers
Controllers include the keyboard, bender, and other controllers, as well as MIDI messages.
Control messages are sent to blocks (1) through (9) to control tones.
A virtual controller function can be used to freely configure combinations of controller types
(sources) and the parameters being controlled (destinations) to perform such actions as “pedal
depressed, change volume”.
Volume
Time
Attack Sustain Release 2
Decay Release 1
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XW-P1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XW-P1 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XW-P1

Casio XW-P1 User Manual - German - 95 pages

Casio XW-P1 User Manual - Dutch - 95 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info