586844
17
Zoom out
Zoom in
Previous page
1/20
Next page
SUPPORT
SPECIFICATIONS
TROUBLE SHOOTING
1) The JOG platters do not operate.
-Adjust the TOUCH SENSOR LEVEL located on the rear panel of the XW-J1 (no.34).
-Check SCRATCH button (no.11) is ON.
2) Can not playback.
-The sensor setting is possibly too high. Adjust the TOUCH SENSOR LEVEL located on the rear
panel of the XW-J1 (no.34).
3) iPhone5(with lightning connector) does not recognize the XW-J1
-Check the version of iOS application(vjay / djay) http://www.algoriddim.com/vjay (or /djay)
-Disable Bluetooth and WIFI on iPhone5
-Restart iPhone5 (put down again once the power supply)
: Hold down the sleep/wake button for a seconds,until the red slider appears. Slide the slider
with your finger to power off.
-Force a restart of iPhone5(reset of the device)
: Please close all running apps before doing this operation. Hold down the sleep/wake button
and home button for a second.
) My computer doesn't recognize XW-J1.
-Check if your computer fulfills the minimum system requirements.
-Connect the USB cable to another USB port. (Certain USB ports may have connection errors.)
-If you are using a USB hub, try connecting directly to your computer. Also try connecting to all USB ports.
-Try changing the USB cable. Using a poor quality USB cable can cause communication errors.
-Quit all other running applications including anti-virus software and resident software. Also turn off
WiFi and Bluetooth connections.
-Clean up your MIDI driver registry from MIDI Studio. (Refer to page 22)
Open the MIDI studio with XW-J1 disconnected. You can delete by choosing this device name.
icon, and clicking on the "Remove device."
Inputs / Outputs
Dimensions 354(W) x 250(D) x 47(H)mm (with knobs)
Weight 1.45kg
Power consumption
5.9V 17W (During iOS device charging)
PHONES jacks : Stereo standered jacks x 1
Output impedance : 47Ω / Output Voltage : 0.85V(RMS) *47Ωload
RCA jacks : Stereo RCA jacks x 1
Output impedance : 1KΩ / Output Voltage : 1.3V (RMS)
AC Adaptor
AD-59300S
Power : 5.9V DC
USB port : TYPE B
17
(note)
-Although XW-J1 uses a 30-pin connector cable to connect to iOS devices,it can also be
used with iOS devices that have a Lightning connector, such as the iPad Retina, iPad mini
and iPhone5.Please only use the genuine 30-pin to Lightning adaptor provided by Apple.
Other adaptors are not supported for use with XW-J1.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XW-J1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XW-J1 in the language / languages: English as an attachment in your email.

The manual is 19,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info