723255
85
Zoom out
Zoom in
Previous page
1/102
Next page
85
Light Control:
Configures the Light Control settings and Light Control Off
Mode settings. Setting 2 is valid for XJ-F Series projectors
only.
PMD RW 0: Bright, 1: Normal
2: Light Sensor On
3: Light Output 7
4: Light Output 6
5: Light Output 5
6: Light Output 4
7: Light Output 3
8: Light Output 2
9: Light Output 1
Freeze: Switches freeze on or off. FRZ RW 0: Off, 1: On
Keystone Correction:
Specifies the keystone correction setting as a value that
corresponds to the typical Setup Menu “Keystone
Correction” settings below.
0: Keystone Correction –60
60: Keystone Correction 0
120: Keystone Correction +60
Example: 65 here, specifies a setting equivalent to
Keystone Correction +5.
KST RW 0 to 120
Keystone Correction +/–:
Raises or lowers the current keystone correction setting
by 1.
+: KSP
–: KSM
W 0 to 120
Key: Operation executed when a key is pressed.
Settings 26 through 30 are valid for network model
projectors only.
Note
Each KEY command setting corresponds to a
remote controller key. The projector operation that is
performed in response to a KEY command is
identical to the corresponding remote controller key
operation. When sending KEY commands to the
projector from an external device, make sure they
are sent in the same sequence that the
corresponding key operations are performed on the
remote controller.
KEY W 1: , 2: , 3: , 4:
5: ENTER, 6: ESC, 10: FUNC
11: MENU, 12: POWER
13: AUTO, 14: INPUT
15: TIMER, 16: ASPECT
17: BLANK, 18: FREEZE
19: , 20: KEYSTONE +
21: KEYSTONE –
22: D-ZOOM +
23: D-ZOOM –
24: VOLUME +
25: VOLUME –
26: PLAY(R)
27: REWIND(s)
28: FORWARD(d)
29: PREVIOUS(S)
30: NEXT(T)
Setup Type:
Specifies how the projector is set up relative to screen for
projection.
0: Projection to a screen in front of the projector*
1
1: Ceiling mounted projection from behind the screen*
2
2: Projection from behind the screen*
1
3: Ceiling mounted projection to a screen in front of the
projector*
2
POS RW 0 to 3
APO: Used to change the Auto Power Off setting (trigger time
setting or Auto Power Off disable).
APO RW 0: Off, 1: 5 minutes
2: 10 minutes, 3: 15 minutes
4: 20 minutes, 5: 30 minutes
Error: Reads the projector error status. STS R 0: Normal, 1: Fan error
2: Temperature error
7: Light error, 16: Other error
Function
Command
Name
RW Settings
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XJ-V10X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XJ-V10X in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XJ-V10X

Casio XJ-V10X User Manual - German - 102 pages

Casio XJ-V10X Quick start guide - German, Dutch - 22 pages

Casio XJ-V10X User Manual - Dutch - 102 pages

Casio XJ-V10X Quick start guide - Italian, Portuguese, Swedish - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info