543362
20
Zoom out
Zoom in
Previous page
1/26
Next page
E-18
Troubleshooting
Check the following items whenever you experience any problem with the projector.
Problem Cause and Recommended Action
Power does not turn
on.
z If the POWER/STANDBY indicator is not lit, the AC power cord is not
connected correctly. Connect the AC power cord correctly.
z If the TEMP or LIGHT indicator remains flashing or lit, it means some type
of error has occurred. See “Error Indicators and Warning Messages” in the
User’s Guide (UsersGuide_English.pdf).
No image is projected
or the projected image
is abnormal.
z The computer or video device connected to the projector is not turned on
or it is not outputting a video signal. Make sure the connected computer or
video device is turned on, and perform the required operation on it to
output a video signal.
z The correct output source is not selected on the projector. On the
projector, select the correct input source that corresponds to the
connected device.
z Images may not project correctly when you have the component output
terminal of a video device connected to the COMPUTER IN (1 or 2)
terminal of the projector. Connect to the VIDEO terminal or S-VIDEO
terminal of the projector.
Image color or display
is very abnormal.
The wrong option (“Component” or “RGB”) may be selected for the “Input
Settings J COMPUTER 1 terminal (or COMPUTER 2 terminal)” setting on the
setup menu. The image will not be projected correctly if “Component” is
selected while the projector’s COMPUTER IN (1 or 2) terminal is connected to
the RGB output terminal of a computer, or if “RGB” is selected while the
projector’s COMPUTER IN (1 or 2) terminal is connected to the component
video output terminal of a video device. On the setup menu, select “Auto” for
the “Input Settings J COMPUTER 1 terminal (or COMPUTER 2 terminal)”
setting. See the User’s Guide (UsersGuide_English.pdf).
I can’t understand
messages or menus
because they are the
wrong language.
Perform the following operation to select the language you want. See the
User’s Guide (UsersGuide_English.pdf).
1. Press the [MENU] key to display the setup menu.
2. If the input signal is HDMI, press [T] four times and then press the
[ENTER] key. If the input signal is not HDMI, press [T] five times and then
press the [ENTER] key.
3. Press [S] twice and then press the [ENTER] key to display the language
selection menu.
4. Use the [T] and [S] keys to move the highlighting to the language you
want to select and then press the [ENTER] key.
5. Press the [MENU] key to exit the setup menu.
No sound z The projector’s volume level setting may be too low or muted. Press the
remote controller [VOLUME] key and then use [T] and [S] to adjust the
volume level. See the User’s Guide (UsersGuide_English.pdf).
z The volume level setting of the device connected to the projector is too low
or the other device is not outputting audio. Adjust the volume level of the
connected device.
z The audio output of the connected device may not be connected correctly
to the projector’s AUDIO IN (1 or 2) terminal or AUDIO IN L/R terminal.
Check the connection, referring to one of the following (depending on the
type of connected device): “Connecting a Computer to the Projector” in
this manual or “Connecting to a Video Device” in the User’s Guide
(UsersGuide_English.pdf)
z Line” is selected for the setup menu “Option Settings 2 J Audio Out”
setting. Change the “Audio Out” setting to “Speaker”. See the User’s
Guide (UsersGuide_English.pdf).
B
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XJ-ST155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XJ-ST155 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XJ-ST155

Casio XJ-ST155 Additional guide - English - 67 pages

Casio XJ-ST155 Installation Guide - English - 47 pages

Casio XJ-ST155 User Manual - English - 64 pages

Casio XJ-ST155 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info