536703
44
Zoom out
Zoom in
Previous page
1/56
Next page
44
Troubleshooting
Indicators keep you informed about the current operational status of the projector. The following
shows what the indicators look like when operation is normal.
When a warning message appears on the projection screen, or when the POWER/STANDBY, LIGHT,
and TEMP indicators are lit or flashing in a pattern other than those shown above, it means that a
projector error has occurred. For details, see “Error Indicators and Warning Messages” (below).
Warning messages and indicators let you know what the problem is when a projector error occurs.
When an error occurs, wait until the fan stops before unplugging the AC power cord. If you unplug the
AC power cord while the fan is still operating, an error may occur when you plug the AC power cord
back in.
Indicators
When the indicators appear
like this:
It means this:
POWER/
STANDBY
LIGHT TEMP
You have just plugged the AC power cord into a power outlet. Wait
until the projector enters the standby state (see below) before trying
to turn on power.
zzz
Amber Amber Amber
zccStandby state: The AC power cord is plugged in and the projector is
in standby.
Amber
zz
Projector is warming up after being turned on.
Green Amber Amber
zccProjector is on and standing by for use.
Green
ccProjector is performing internal power down processes.
Amber
zz
c “On (Auto)” or “On (Manual)” is selected for the projector’s Eco Mode
(page 23) setting.
Green Green
z
: Lit : Flashing
c
: Unlit
Error Indicators and Warning Messages
Indicator/Error Message Description and Required Action
POWER : Green steady The projector’s internal temperature is very high. Press the [ESC] key to
clear the warning message and perform the following steps.
1 Check for any blocking of the projector’s intake vents and exhaust
vents, and make sure that there is sufficient space around the
projector. See
Setup Precautions” (page 10).
2 If there is dust accumulated around the intake vents and/or exhaust
vents, turn off the projector and remove it. See
Cleaning the
Projector” (page 43).
LIGHT :
TEMP :
Message : Internal temperature is too
high. Check projector air
vents for blockage.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XJ-A256 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XJ-A256 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XJ-A256

Casio XJ-A256 User Manual - English - 47 pages

Casio XJ-A256 User Manual - English - 69 pages

Casio XJ-A256 Quick start guide - English - 17 pages

Casio XJ-A256 Installation Guide - German, Dutch - 15 pages

Casio XJ-A256 User Manual - Dutch - 56 pages

Casio XJ-A256 Installation Guide - Danish, Italian, Polish, Portuguese, Swedish, Norwegian, Finnish - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info