216268
26
Zoom out
Zoom in
Previous page
1/38
Next page
E-25
Troubleshooting
English
Check the following items whenever you experience any problem with the projector.
Projector Troubleshooting
Problem Cause and Recommended Action See
The projector does not
turn on when I press the
[P] (Power) key.
If the POWER/STANDBY indicator is not lit, the AC power
cord may not be connected correctly.
Make sure the AC power cord is connected
correctly to the projector and the power outlet (see
“Turning On the Projector”).
page E-18
If the TEMP or LIGHT indicator remains flashing or lit, it
means some type of error has occurred.
See “Error Indicators and Warning Messages”.
User’s Guide
(UsersGuide_
English.pdf)
The projector does not
project any image from
the connected device.
The connected computer or video device may not be
turned on, or it may not be outputting a video signal.
Make sure the connected computer or video
device is turned on, and perform the required
operation on it to output a video signal.
The correct input source is not selected on the projector.
On the projector, select the input source that
corresponds to the device whose image you are
trying to project (see “Selecting the Input Source”).
page E-21
The projector does not
correctly project the
image from the
connected video device.
Images may not project correctly when you have the
component output terminal of a video device connected to
the COMPUTER terminal of the projector.
Try using the projector’s AV terminal (see
“Connecting to a Standard Video Device”).
page E-17
When RGB/Component
is selected as the input
source, the color of the
projected image or the
image itself is abnormal.
The wrong option (“Component” or “RGB”) may be
selected for the “Input Settings COMPUTER Terminal”
setting on the setup menu. The image will not be projected
correctly if “Component” is selected while the projector’s
COMPUTER terminal is connected to the RGB output
terminal of a computer, or if “RGB” is selected while the
projector’s COMPUTER terminal is connected to the
component video output terminal of a video device.
Use the setup menu to change the “Input
Settings COMPUTER Terminal” setting to
“Auto” to correct the problem.
User’s Guide
(UsersGuide_
English.pdf)
I can’t understand
messages or menus
because they are the
wrong language.
Perform the following operation to select the language you
want.
1. Press the [MENU] key to display the setup menu.
2. If the input signal is HDMI, press [] four times and then
press the [ENTER] key. If the input signal is not HDMI,
press [] five times and then press the [ENTER] key.
3. Display the language selection menu.
If the input signal is RGB, press [] six times and then
press the [ENTER] key.
If the input signal is not RGB, press [] five times and
then press the [ENTER] key.
4. Use the [] and [] keys to move the highlighting to the
language you want to select and then press the [ENTER]
key.
5. Press the [MENU] key to exit the setup menu.
User’s Guide
(UsersGuide_
English.pdf)
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio xj a150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio xj a150 in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info