586857
37
Zoom out
Zoom in
Previous page
1/51
Next page
37
Error Indicators and Warning Messages
Warning messages and indicators let you know what the problem is when a projector error occurs.
When an error occurs, wait until the fan stops before unplugging the AC power cord. If you unplug the
AC power cord while the fan is still operating, an error may occur when you plug the AC power cord
back in.
Indicator/Error Message Description and Required Action
POWER : Green steady The projector’s internal temperature is very high. Press the [ESC] key to
clear the warning message and perform the following steps.
Check for any blocking of the projector’s intake vents and exhaust
vents, and make sure that there is sufficient space around the
projector. See
Setup Precautions” in the “User’s Guide (Basic
Operations)”.
If there is dust accumulated around the intake vents and/or exhaust
vents, turn off the projector and remove it. See
Cleaning the
Projector” (page 36).
TEMP :
LIGHT :
Message : Internal temperature is too
high. Check projector air
vents for blockage.
POWER : Amber flashing
Amber steady
Power has turned off automatically due to internal overheating. Perform
the following steps.
Check for any blocking of the projector’s intake vents and exhaust
vents, and make sure that there is sufficient space around the
projector. See
Setup Precautions” in the “User’s Guide (Basic
Operations)”.
If there is dust accumulated around the intake vents and/or exhaust
vents, remove it. See
Cleaning the Projector” (page 36).
If there is no problem with the projector’s vents, confirm that the POWER/
STANDBY indicator is lit amber (without flashing), and then turn power
back on again. If the error occurs again when you turn power back on,
contact your retailer or nearest authorized CASIO Service Center.
TEMP :
LIGHT :
Message : Internal temperature is too
high. The projector will
turn off.
POWER : Amber flashing
Red steady
Power has turned off automatically due to internal overheating. This
causes a dialog box containing the text in the next item below to appear
the next time you turn on the projector. Follow the steps that are
provided.
TEMP : Red flashing
(0.5-second interval)
LIGHT :
Message :
POWER : Green steady
The last time you were using the projector, power turned off
automatically due to internal overheating. Press the [ESC] key to
clear the warning message and perform the following steps.
Check for any blocking of the projector’s intake vents and exhaust
vents, and make sure that there is sufficient space around the
projector. See
Setup Precautions” in the “User’s Guide (Basic
Operations)”.
If there is dust accumulated around the intake vents and/or exhaust
vents, turn off the projector and remove it. See
Cleaning the
Projector” (page 36).
Disconnect the power cord from the projector and wait for all of the
projector’s indicators to go out. Next, reconnect the power cord and
turn the projector back on. If the error occurs again when you turn
power back on, contact your retailer or nearest authorized CASIO
Service Center.
TEMP :
LIGHT :
Message : The projector has a
history of turning off due
to high temperature.
Check air vents for
blockage.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XJ-A130V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XJ-A130V in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info