466911
79
Zoom out
Zoom in
Previous page
1/132
Next page
E-77
738A-E-079A
Using the SMF Player
Configuring Other Settings
To configure other settings
1
While playback is stopped, select the file you want
to play back.
Perform steps 1 through 3 under To play back an
SMF to select a file.
2
Press the [] CURSOR button to display a screen
for selecting the part you want to play on the
keyboard (play along part).
Use the [] and [] CURSOR buttons, the [+] and []
buttons, or the number buttons to select the play along
part.
You can specify the part you want to play on the
keyboard (the play-along part) as a value in the range
of 1 through 16.
After specifying a part, turn off the channel that
corresponds to the play-along part you selected. See
Turning Channels On and Off on page E-40 for more
information. Performing this step turns off the
applicable part so you can play it on the keyboard
along with the rest of the SMF playback.
NOTE
Entering the SMF Player Mode initializes all parts by
turning on all Mixer Mode channels.
3
Press the [] CURSOR button to display the
playback mode selection screen. Use the [] and
[] CURSOR buttons or the [+] and [] buttons to
select the playback mode.
You can select from among the following four playback
modes.
S1 : One file, one time
SL : One file, repeat
A1 : All files, one time
AL : All files, repeat
4
Press the [] CURSOR button to display the output
mode selection screen.
Use the [] and [] CURSOR buttons or the [+] and
[] buttons to select the output mode.
You can select from among the following two output
types.
int : Keyboards built-in speakers
out : MIDI OUT
NOTE
Layer, split, and Auto Harmonize are automatically turned
off in the SMF Player Mode.
3
Press the [] CURSOR button to display the file
selection screen.
SMFs are those shows file names end with the
extension MID. An error message appears at this
time if there are no SMF files currently in external
storage media you are using.
4
Use tthe number buttons to input the three-digit
file number of the file you want to play.
The name of the currently selected file will appear in
the text area of the display. The file number is shown
in the number area of the display. The Tempo/
Measure area of the display shows the size of the file
in kilobytes.
You can also use the [] and [] CURSOR buttons or
[+] and [] buttons to change the file.
5
Press the START/STOP button
This starts playback of the selected file.
You can use the TEMPO buttons to adjust the tempo
within the range of 30 to 255.
You can use the CHANNEL buttons to turn channels
1 through 16 on and off, regardless of whether file
playback is in progress or stopped. For more
information, see Turning Channels On and Off on
page E-40.
6
To stop file playback, press the START/STOP button
again.
Adjusting SMF Playback Volume
The following procedure explains how to control the overall
volume of SMF data playback. You can adjust volume while
playback is stopped or ongoing.
1
Press the ACCOMP VOLUME button.
This causes the SMF Vol. indicator to appear on the
display, along with a value that indicates the current
SMF volume setting.
2
Use the [+] and [] buttons or the number buttons
to adjust the SMF volume.
You can specify a setting in the range of 000
(minimum) to 127 (maximum).
Pressing [+] and [] at the same time returns the SMF
volume setting to 100.
Note that this setting does not affect the volume of
the notes you play on the keyboard.
WK3200_e_65-78.p65 05.3.15, 6:17 PM77
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-3700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-3700 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio WK-3700

Casio WK-3700 User Manual - German - 130 pages

Casio WK-3700 User Manual - Dutch - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info