Manual Casio WK-3700 (page 62 of 132) (English)

466911

Zoom out

Zoom in

1/132

E-60

Song Memory Function

Use the SONG MEMORY TRACK buttons to select

the track you want to record to (2 through 6).

Example: Select Track 2.

Specify a tone number.

• Pressing a TONE button or the DRAWBAR ORGAN

button displays the tone number and name on the

display. You can then use the number buttons, or the

[+] (increase) and [–] (decrease) buttons to change the

tone.

• After changing the tone number, press any keyboard

key to clear the tone number and name screen, and

return to the note input screen.

Use the keyboard keys to input notes, or the [0]

button to input rests.

• At this time, the display shows the keyboard pressure

(velocity). Use the [+] (increase) and [–] (decrease)

buttons to change the velocity.

• You can also input a chord.

Use the number buttons to input the length of the

note or rest (page E-58).

Repeat steps 4 and 5 to input more notes.

Press the START/STOP button to end recording

when you are finished.

NOTE

• Use the procedure under “Correcting Mistakes While

Step Recording” on this page to correct input mistakes

you make during step recording.

• You can add on to a track that already contains recorded

data by selecting that track in step 2 of the above

procedure. Doing so automatically locates the step

recording start point at the first beat immediately

following the previously recorded data.

• Whenever you are recording to Tracks 2 through 6, the

entire keyboard functions as a melody keyboard,

regardless of the current MODE button setting.

• When playing back data recorded with Advanced Tones

at the beginning of multiple tracks, the keyboard uses

the DSP type of the Advanced Tone that is recorded in

the track with the largest track number.

• When playing back a track that was recorded with an

Advanced Tone selected, they may be a slight delay

before the first note of the track sounds. If this happens,

try to insert a very short rest at the beginning of the

track.

738A-E-062A

Flash

Track Contents After Step Recording

In addition to notes and rests, the following data is also

recorded to the track during step recording. This data is

applied whenever the track is played back.

• Tone number

Level Meter Contents During Record/

Edit Standby

Channels 11 through 16 correspond to Tracks 1 through 6.

Whenever the keyboard is in record or edit (page E-62)

standby, the level meter display shows which tracks already

contain recorded data and which are still empty. Tracks with

four lit segments already contained recorded data, while

tracks with one lit segment are not yet recorded.

Correcting Mistakes While Step

Recording

Memory data can be thought of as a musical score that

progresses from left to right, with the input point normally

at the far right of the recorded data.

The procedure described here lets you move the input point

to the left in order to make changes in data you have already

input. Note, however, that moving the input point to the left

and changing data automatically deletes all of the data

recorded to the right of the input point.

Recording track

Not recording track

WK3200_e_53-64.p65 05.3.15, 6:17 PM60

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-3700 in the language / languages: English as an attachment in your email.

The manual is 5,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio WK-3700

Casio WK-3700 User Manual - German - 130 pages

Casio WK-3700 User Manual - Dutch - 132 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio WK-3700 Manual

Product: