586842
76
Zoom out
Zoom in
Previous page
1/96
Next page
E-74
Disk Drive Error Messages
733A-E-076A
Err ReadOnly
Err Format
Err Disk R/W
Err DiskFull
Err Mem Full
Err Not SMF0
Err No Disk
Err No File
Err Protect
Err Convert
Err WrongDat
Attempt to save a file using the same
name as an existing file that is read
only.
1. The format of the diskette is not
compatible with this keyboard.
2. The diskette is not formatted.
3. The diskette is damaged.
The diskette is damaged.
The diskette is full.
Keyboard memory became full while
importing data from diskette.
The file you are reading is not an SMF
0 format file.
1. The diskette is not loaded in the
drive correctly.
2. No diskette is loaded in the drive.
The keyboard cannot find any file it can
read on the diskette.
The diskette is write protected.
The accompaniment pattern data you
are trying to convert is of a type that
cannot be converted by this keyboard.
The data on the diskette is corrupted.
Save the new file to a different diskette or use another
name.
1. Change to a diskette that has the proper format.
................................................................................E-67
2. Format the diskette. ............................................. E-73
3. Use a different diskette.
Use a different diskette.
1. Use a different diskette.
2. Delete any files you no longer need in order to make
room for the data you want to save. .................E-73
1. If you have user patterns stored in Pattern Sequenc-
er memory, use the following procedure to delete
user patterns you no longer need from the user area
(patterns 120 to 129).
1 Clear the work area using the procedure under
Work Area Clear on page E-54.
2 While the work area empty (cleared), use the pro-
cedure under To exit the Pattern Sequencer
Mode and save work area contents on page E-
56 to save the work area to the accompaniment
pattern user area accompaniment numbers that
contain patterns you no longer need. Saving the
empty work area effectively deletes data currently
stored in memory.
2. If you have song data stored in Song Sequencer
memory (SG0, SG1), delete the song data you no
longer need. ..........................................................E-46
Use SMF 0 format files only. ...................................E-69
1. Eject the diskette from the drive and reload it.
................................................................................E-68
2. Load a diskette into the drive.
Use a diskette that contains data stored by this key-
board or compatible data from another device.
1. Use a different diskette.
2. Close the diskettes write protect hole to enable data
storage. .................................................................. E-67
Try converting other accompaniment pattern data.
Use other data or another diskette.
Message
Cause Action
WK-1800/1600(E)-67~74 03.7.31, 5:22 PMPage 74 Adobe PageMaker 6.5J/PPC
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-1800 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info