586842
70
Zoom out
Zoom in
Previous page
1/96
Next page
E-68
733A-E-070A
Basic Diskette Operation
The following is the basic procedure when using a diskette.
1.
Insert a diskette into the keyboards disk drive.
2.
Press the DISK button.
This causes the indicator lamp above the DISK button to light,
which indicates the SMF Play Mode. See Playing Back an
SMF on page E-69 for details on using this mode.
3.
Press the DISK button again to display the first disk
operation screen.
The indicator lamp above the DISK button flashes at this time.
4.
Scroll through the disk operation screens.
Use the [] and [] cursor keys to scroll through the four
available screens.
Option Use this screen to set SMF playback options. See
Playing Back an SMF on page E-69.
DiskLoad Use this screen to load a file created with the
WK-1800. See To load keyboard data from a diskette on
page E-71.
DiskSave Use this screen to save data created with the
WK-1800. See To save keyboard data to diskette on page
E-70.
Utility Use this screen to access utilities that let you con-
vert rhythm data, delete data from a diskette, and format a
diskette. See Using the Utilities on page E-71.
5.
Perform the operation for the displayed disk opera-
tion screen.
Use the [] and [] cursor keys to make settings.
See the sections that follow this procedure for full details on
performing disk operations.
6.
After you are finished, press the DISK button.
This causes the indicator lamp above the DISK button to go
out.
NOTE
You will be able to start the above procedure even when there is no dis-
kette in the disk drive.
Inserting and Ejecting a Diskette
The following describes how to insert a diskette into the disk drive
and how to eject it.
To insert a diskette into the floppy disk drive
1.
With the label area of the diskette facing up, insert
the diskette shutter first into the disk drive, as shown
in the illustration.
2.
Slide the diskette into the drive as far as it will go,
until it clicks into place.
To eject a diskette from the floppy disk drive
IMPORTANT!
Before ejecting a diskette, always check to make sure that the ac-
cess lamp is not lit or flashing. A lit or flashing access lamp means
that the keyboard is performing a data read or write operation. Eject-
ing a diskette while it is being accessed can cause its data to become
corrupted.
1.
Press the Eject button.
This causes the diskette to be partially ejected from the disk
drive.
2.
Remove the diskette from the drive by hand.
AMPENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS
DECAY
SUSTAIN
PITCHENVELOPE
MIN
MAX
FULL RANGE
CHORD
CASIO CHORD
SONG
FINGERED
PATT E RN
EXTERNAL
INTERNAL
UPPER1
CH 1
UPPER2
CH 2
LOWER1
CH 3
LOWER2
STOREBANK
CH 4
ACC VOL.
CH 5
CHORD1
CH 6
CHORD2
CH 7
CHORD3
CH 8
BASS
CH 9
RHYTHM
CH 10
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
789
456
1
0
23
PARAMETER RESET:
DELETE
/YESS/NO
MAIN MANU/
CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
]
WK-1800/1600(E)-67~74 03.7.31, 5:22 PMPage 68 Adobe PageMaker 6.5J/PPC
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-1800 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info