586842
54
Zoom out
Zoom in
Previous page
1/96
Next page
E-52
To record the Bass part
1.
Press CHANNEL button CH9 to select the bass part.
2.
Select a bass tone.
3.
Use the keyboard to play the bass part. Use the mea-
sure and beat values that appear on the display for
timing.
To record Chord 1, 2, and 3 parts
1.
Use CHANNEL buttons CH6, CH7, and CH8 to se-
lect a chord part.
2.
Select a chord tone. Use any tone besides the drum
sounds.
3.
Use the keyboard to play the chord part. Use the mea-
sure and beat values that appear on the display for
timing.
To delete specific notes
Play the accompaniment pattern.
While holding down [+] and [], press the keyboard key that corre-
sponds to the note you want to delete at the time the note sounds
in order to delete it. To get the timing right, you probably should
press the keyboard key just before the note sounds. This will de-
lete that single note only.
To delete a part
During record standby, select the part you want to delete and then
press [+] and [] at the same time. In response to the message dEL
Sure? that appears on the display, press the YES button to delete
all of the contents of the part or NO to abort the delete procedure
without deleting anything.
733A-E-054A
Using the Pattern Edit Mode
This section describes how to use the Pattern Edit Mode to change
various settings for a pattern you are currently creating or are about
to create.
IMPORTANT!
The procedures in this section all assume that you have read and are
familiar with the information under Pattern Sequencer Basics on
page E-48, and that you already know how to navigate between Pat-
tern Sequencer modes.
To select main menus and sub-menus in the
Pattern Edit Mode
1.
While in the Pattern Create Mode, press the PATTERN
button once to enter the Pattern Edit Mode.
This causes the indicator lamp above the PATTERN button
to flash, and the Global menu to appear on the display.
2.
Perform the key operations described below to dis-
play a different main-menu or sub-menu.
Use the [] and [] cursor keys to move between main-
menus.
Press the ENTER button, [], or [] to scroll through the
sub-menu of the current main-menu. The sample display
below is the Global menus metronome sub-menu.
Use [+] and [] to change the setting of the sub-menu on the
display.
To return to a main menu from one of its sub-menus, press
the ENTER button.
3.
To return to the Pattern Create Mode, maneuver to
the Escape screen and then press ENTER.
AMPENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS
DECAY
SUSTAIN
PITCHENVELOPE
MIN
MAX
FULL RANGE
CHORD
CASIO CHORD
SONG
FINGERED
PATTERN
EXTERNAL
INTERNAL
UPPER1
CH 1
UPPER2
CH 2
LOWER1
CH 3
LOWER2
STOREBANK
CH 4
ACC VOL.
CH 5
CHORD1
CH 6
CHORD2
CH 7
CHORD3
CH 8
BASS
CH 9
RHYTHM
CH 10
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
789
456
1
0
23
PARAMETER RESET:
DELETE
/YESS/NO
MAIN MANU/
CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
] (YES/NO)
 

4
4

Indicates the Pattern
Edit Mode.
Menu title (Global in
this case).
Tempo display
Indicates currently
enabled cursor keys.
Original key
Original key
Indicates the
Global menu
Abbreviation of
sub-menu name
Current setting of
displayed sub-menu
WK-1800/1600(E)-48~57 03.7.31, 5:21 PMPage 52 Adobe PageMaker 6.5J/PPC
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-1800 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info