586842
51
Zoom out
Zoom in
Previous page
1/96
Next page
E-49
Pattern Sequencer Modes
The Pattern Sequencer has two modes: a Pattern Create Mode for
recording a new pattern, and a Pattern Edit Mode for changing the
settings of a pattern.
After you finish creating or editing a pattern, you store it in memory
and assign it a number for later recall.
The following procedure provides the basics for navigating between
Pattern Sequencer modes.
To navigate between Pattern Sequencer
modes
1.
Before turning on the Pattern Sequencer, select the
rhythm you want to use as a base for your original
rhythm.
2.
Press the PATTERN button.
This enters the Pattern Create Mode, which is indicated when
the indicator lamp above the PATTERN button is lit. The in-
dicator Ptn in the tone/rhythm number area of the dis-
play (item 3 on page E-10) also indicates that the Pattern Cre-
ate Mode.
Entering the Pattern Create Mode copies the rhythm you se-
lected in Step 1 into the Song Sequencer work area. Opera-
tions you perform with the Pattern Sequencer affect the pat-
tern that is currently in the work area.
If the rhythm pattern you selected in step 1 is too large to fit
in the work area, the Message Ptn Mem Full appears on
the display for about three seconds. After that, the keyboard
enters to the Pattern Create Mode with the work area empty.
To make more room in the work area for the rhythm pattern,
delete user rhythm patterns stored in the user area (pattern
numbers 100 through 109) that you no longer need.
In the Pattern Create Mode, you can play back the accompa-
niment pattern in the work area and even record along with
the playback. See Using the Pattern Create Mode on page
E-50 for full details on using the Pattern Create Mode.
3.
Press the PATTERN button again.
This enters the Pattern Edit Mode, which is indicated when
the indicator lamp above the PATTERN button is flashing.
The indicator Edt in the tone/rhythm number area of the
display (item 3 on page E-10) also indicates the Pattern Edit
Mode.
The Pattern Edit Mode screen can be scrolled between the
following three menus with the [] and [] cursor keys:
Global, Element, and Part. In addition to the menus,
there is also an Escape screen for exiting the Pattern Edit
Mode. Each contains parameters for making settings for the
accompaniment pattern in the Pattern Sequencer work area.
See Using the Pattern Edit Mode on page E-52 for full de-
tails on using the Pattern Edit Mode.
Displaying the Pattern Edit Modes Escape screen and then
pressing the ENTER button returns to the Pattern Create
Mode in step 2.
4.
Press the PATTERN button again.
The indicator lamp above the PATTERN button continues to
flash, and the message Save? appears on the display. See
Exiting the Pattern Sequencer Mode on page E-56 for de-
tails on how to save Pattern Sequencer data.
*
Work Area
The work area is an area of memory where rhythm pattern data is
stored temporarily during recording and editing. After you are fin-
ished recording or editing, you can specify whether you want to
save work area contents or delete them without saving.
733A-E-051A
Unlit
Pattern Edit Mode
Pattern Create Mode
Normal
Press
ENTER.
Press PATTERN.
Press PATTERN.
Press PATTERN.
Press PATTERN.
PATTERN
PATTERN
PATTERN
PATTERN
Lit
Flash
Flash
WK-1800/1600(E)-48~57 03.7.31, 5:21 PMPage 49 Adobe PageMaker 6.5J/PPC
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-1800 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info