466586
7
Zoom out
Zoom in
Previous page
1/20
Next page
— 7
1.4.2 Ground Wire
Use a ground wire that matches your printer. It is recommended to use a ground wire that is
at least the same length as the power cable. Connect the ground wire to the back of the printer
with the supplied screw as shown above.
1.4.3 Power Supply
CAUTION :
Before connecting or disconnecting the power supply to the printer, make sure
that the power supply is unplugged from the power outlet and connect the
power cord into the adapter.
1. Make sure that the adapter plug is unplugged from the power outlet.
2. Plug the DC cable into power connector with the at side of the plug turned up.
CAUTION :
When disconnecting the adapter, turn the printer off and the DC cable out
by gripping the plug. Do not pull it out by the cord.
1.5 Self Test
Use the self test to check that your printer is operating properly. It checks the control circuits,
printer mechanisms, print quality, and displays the rmware version and DIP switch settings.
1. Make sure that the printer cover is closed properly and turn the power off.
2. While holding down the FEED button, turn the printer on and continue holding down the
FEED button until the self test starts.
3. The self test will end automatically and detach the self test print out.
NOTE :
Refer to
Chapter 3, Maintenance & Troubleshooting
about how to install and
replace the paper roll.
1.6 DHCP server recognition
If the printer is connected via Ether-net cable, the system requires ID number and IP number of
the printer. Activate DHCP server recognition, if your system has a DHCP server. (By DHCP
server, IP numbers are set automatically.)
1. Make sure that the DIP SW 2-5 is set to on.
2. While holding down the ONLINE button, turn the printer on.
3. Check the printout result.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio UP 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio UP 400 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio UP 400

Casio UP 400 User Manual - German - 2 pages

Casio UP 400 User Manual - German - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info