587013
124
Zoom out
Zoom in
Previous page
1/134
Next page
123 E
Troubleshooting
Troubleshooting
Error
code Message Meaning Action
E051 CHK/TBL No. is
occupied
Attempt to made use <New Check> to open a new check
using a number that is already used for an existing check
in check tracking memory.
Finalize and close the check that is currently under the
number that you want to use or use a different check
number.
E052 CHK/TBL No. is busy Attempt to use the same check number whilst the speci-
ed number is being used in the other terminal.
Use another check number or close the check at that
terminal.
E053 CHK/TBL No. is not
opened
Attempt made to use <Old Check> reopen a new check
using a number that is not used for an existing check in
check tracking memory.
Use the correct check number (if you want to reopen a
check that already exists in check tracking memory) or
use <New Check> to open a new check.
E054 Out of CHK/TBL No.
range
Check number range over. Enter correct number.
E055 In the SEP CHK
operation
Normal registration is prohibited during separate check
operation.
Terminate separate check operation.
E056 CHK range full All check number are occupied in range. Recall the stored data.
E059 Press EAT-IN or
TAKE-OUT key
Attempt to nalize a transaction without specifying
<EAT-IN> or <TAKE-OUT>.
Press <EAT-IN> or <TAKE-OUT>.
E060 Printer offl ine External printer of ine
E061 Printer error External printer went down.
E062 Printer paper end External printer paper end Replace new paper.
E064 Print buffer full Printing buffer full
E066 Print from the
beginning of the
transaction
Attempt to print the last separated transaction on slip. Print from the beginning of the transaction
E075 Negative balance
cannot be fi nalized
Attempt to nalize a transaction when balance is less
than or equal to zero.
Register item(s) until the balance becomes positive
amount.
E085 Data exist in
consolidation fi le
Data exists in the consolidation le. Clear the data.
E100 Operate at the
master terminal
Prohibit master operation. Perform it at master terminal.
E101 PLU maintenance
le full. Press
<#2> to exit
Scanning PLU direct maintenance / batch maintenance
le becomes full.
Terminate the maintenance.
E103 PLU Code is not
exist. Input the
PLU Code
PLU code is not existed in the le. Enter proper PLU code.
E105 PLU fi le full Scanning PLU / not found PLU le full Modify the designated item.
E106 Item exists in the
PLU FILE
The designated item has already existed in the scanning
PLU le.
E112 Close the journal
platen arm
The journal platen arm is opened. Close the journal platen arm.
E114 Close the receipt
platen arm
The receipt platen arm is opened. Close the receipt platen arm.
E139 Negative balance is
not allowed
Attempt to register <–> or <CPN> when the balance
becomes negative.
Enter proper minus / coupon amount.
E146 Arrangement fi le
full
Arrangement le is full. Set the arrangement properly.
E164 Employee No. is
not Found in the
Employee File
Attempt to enter a wrong employee number which is not
set to the employee le.
Enter proper employee number.
E165 Employee No. is not
Clocking-in.
Attempt to clock out the employee who is not clocked in. Enter proper employee number.
E166 Employee No. is
Occupied
Attempt to clock in the employee who has clocked in
already.
Enter proper employee number.
E176 Time&Attendance
le full
Time and attendance le becomes full. Delete unused employee number or reallocate the time
and attendance le.
E179 Please enter birth
date
Check customer’s birthday to sell this item. Enter customer’s birthday
E180 Age does not
permit product
purchase
Customer’s age is not satisfy to by this product. Do not sell this product to the customer for age limitation.
E201 Illegal Format Illegally formatted CF card Format the CF card.
E202 File not found The designated le is not found in the CF card. Enter proper le name.
E203 Insuffi cient memory Insuf cient memory in the CF card. Use a vacant (formatted) CF card.
E205 File already exist. Can not write, because designated le has already been in
the CF card.
Check the operation and retry.
E206 EJ full The Electronic journal memory is full. Clear EJ after issue an EJ report.
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio SE-C6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio SE-C6000 in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info