740164

Casio QW5526 - MRG-B1000D G-shock Manual

16
Zoom out
Zoom in
Previous page
1/21
Next page
3.
Press (C).
Confirm that the small hour and minute
hands, and the small 24-hour hand are all
stopped at 12 o’clock.
30
Small minute handSmall hour hand
Small 24-hour hand
4.
If the small hour and minute hands, and
the small 24-hour hand are not at 12
o’clock, rotate the crown to align them
correctly.
5.
Press (C).
Confirm that the mode hand is stopped at
12 o’clock, and check if the day is
indicated properly.
30
30
Day (Operation start day)
Mode hand
6.
If the mode hand and or the day indicator
is out of alignment, rotate the crown to
move the mode hand to 12 o’clock and the
day to the center of the indicator window.
●
The movement range of the mode hand
and day indicator is limited when you
rotate the crown. The maximum left-
right movement of the mode hand is 180
degrees in either direction. The day
indicator moves only slightly.
●
After the mode hand and day indicator
are in the positions you want, advance
to step 9 of this procedure. If you are
unable to make the adjustments you
want, go to step 7.
7.
Press (C).
Confirm that the day indicator shows 1.
1
1
Day
●
Changing the date setting will cause the
mode hand to rotate repeatedly. In
some cases, the mode dial may
continue to rotate for about 5 minutes.
l
Hand and Day Indicator Movement
8.
If 1 is not shown for the day, rotate the
crown until 1 is shown for the day.
●
The mode hand moves in conjunction
with crown rotation. Move the mode
hand to 12 o’clock.
9.
Push the crown back in.
Note
●
Leaving the crown pulled out for more
than approximately 30 minutes without
performing any operation will
automatically cause the adjustment
operation to become disabled. If this
happens, push the crown back in to its
normal position and then pull it out
again to restart the procedure from the
beginning. Pushing the crown in to its
normal position part way through the
alignment procedure will cause the
hands to return to their normal position.
Any alignment you performed up to
that point will be applied.
Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1.
Configure the World Time (Dual Time)
setting to the current time at your
destination.
30
Destination time
Current time
l
Using MR-G Connected to Configure
Settings
l
Using Watch Operations to Configure
Settings
2.
Disable auto time adjustment.
30
l
Using MR-G Connected to Configure
Settings
l
Using Watch Operations to Configure
Settings
●
After Arriving
1.
Swap the origin time zone time with the
destination time zone time.
30
30
After swappingBefore swapping
Destination time
Destination time
l
Using MR-G Connected to Configure
Settings
l
Using Watch Operations to Configure
Settings
2.
Enable auto time adjustment.
l
Using MR-G Connected to Configure
Settings
l
Using Watch Operations to Configure
Settings
Operation Guide 5526
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW5526 - MRG-B1000D G-shock at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW5526 - MRG-B1000D G-shock in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info