740164

Casio QW5526 - MRG-B1000D G-shock Manual

5
Zoom out
Zoom in
Previous page
1/21
Next page
●
Recovering from Power Saving
Operation
Press any button, perform a crown operation,
or place the watch in a well-lit area to recover
from power saving.
Auto Time Adjustment
Your watch can receive time calibration
signals and connect with a phone to obtain
information that it uses to adjust its day and
time setting.
●
Time Adjustment Using a Time
Calibration Signal
Your watch automatically receives a time
calibration signal at a specific times each day
and adjusts its time setting. This means its
time setting is always accurate without the
need for any adjustment by you.
l
Auto Time Calibration Signal Receive
Time calibration signal
Note
●
You can also trigger a time calibration
signal receive operation manually.
l
Manual Time Calibration Signal
Receive
●
Using a Phone to Adjust the Watch’s
Time
While the watch is paired with a phone, it will
automatically connect with the phone four
times a day and adjust its time setting in
accordance with the phone time.
l
Auto Time Adjustment
12:30
●
If the watch is not showing the correct
time...
If the watch does not indicate the correct time
even after it receives a time calibration signal
or connects with the phone, adjust the hand
and day indicator positions.
l
Using MR-G Connected to Make
Adjustments
l
Using Watch Operations to Make
Adjustments
Checking the Last Time
Adjustment Result
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2.
Press (B).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Second hand
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time setting manually or if
there has been a change in the day.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
30
2.
Press (B).
The second hand will indicate the last
receive result for nine or ten seconds.
30
3.
Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
●
If more than 10 seconds elapse before
you pull out the crown after you press
(B), the second hand will return to
indicating seconds. If this happens,
press (B) again.
4.
Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
30
Crown
5.
Push the crown back in.
Note
●
If the watch is paired with a phone, MR-
G Connected can be used to disable
auto time adjustment.
l
Using MR-G Connected to Disable
Auto Time Adjustment
Operation Guide 5526
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QW5526 - MRG-B1000D G-shock at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QW5526 - MRG-B1000D G-shock in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info