288830

Casio qv 700 Manual

15
Zoom out
Zoom in
Previous page
1/25
Next page
57
Playing Back Images
Notes
• If the page number is displayed in the upper right corner of the
screen when you perform a zoom operation, the number is replaced
by a zoom area indicator (
). This indicator shows you what part
of the image is currently enlarged on the display. You can turn the
zoom area indicator on and off by pressing the DISP button.
• Note that turning display of the zoom area indicator on and off also
affects the playback image data display (page 52) and the record
mode image data display (page 39).
Superimposing a Title on an Image
With this camera you can record a title and then superimpose the
title onto another image. Note that you have to prepare a paper
copy of your title before performing the following procedure.
To record the title
1. Slide the function switch to the REC position.
2. Align the Dial with to select TITLE.
• You can use [+] and [–] to perform exposure compensation
(page 37).
3. Align the frame with the title you want to record and press
the shutter button.
4. Use [+] and [–] to adjust brightness within a range of ±30
levels.
Operation
58
5. Press the shutter button.
• The title is recorded at the brightness level you specified in
step 4.
Important!
Recording a title causes anything that was previously recorded to be
deleted.
Note
The title can be inserted in the area defined by the outer line of the
frame.
To superimpose a title on an image
Important!
• You cannot superimpose a title on the image while memory is full
(indicated by the “Memory Full” message).
• You cannot superimpose a title on a rotated image (page 61).
• The recording date of an image remains as that when the image
was recorded, even if you superimpose a title on the image.
1. Slide the Function switch to the PLAY position.
2. Use the [+] and [–] buttons to scroll through the images in
memory until the one you want to superimpose a title onto
is on the monitor screen.
59
Playing Back Images
3. Press the MENU button.
4. Use the [+] and [–] buttons to select the “TITLE” item and
press the shutter button.
•
TITLE is located in MENU 2.
5. Use the [+] and [–] buttons to select the color of the title.
•
Each press of [+] cycles forward through the colors, while [–]
cycles back.
• There are 10 title color patterns and 10 highlight patterns.
6. Press the shutter button to register the selected color.
7. Use the [+] and [–] buttons to select a plate for the title.
•
Each press of [+] cycles forward
through the plates, while [–] cycles
back.
• There are 7 plates and No Plate.
Operation
60
8. Press the shutter button to register the selected plate.
• If you selected “No Plate” in step 7, skip to step 11 here.
Otherwise, proceed with step 9.
9. Use the [+] and [–] buttons to select the color of the plate.
• Each press of [+] cycles forward
through the plate colors, while [–]
cycles back.
• There are 12 plate color patterns.
10
.Press the shutter button to register the selected color.
11
.Use the [+] and [–] buttons to specify the location of the
title.
• Each press of [+] cycles forward
through the locations of the titles,
while [–] cycles back.
• There are 5 locations.
12
.Press the shutter button to register the selected position.
• The image with the superimposed title is stored in the
memory page immediately following the memory page
where the original image is stored. All images in the
following memory pages are shifted to make room.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio qv 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio qv 700 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info