585958
8
Zoom out
Zoom in
Previous page
1/18
Next page
29
Recording Images
Use the procedure described on page 26 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.
Important!
The exposure warning indicators also appear when lighting is out-
side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.
The manual exposure adjustment procedure (page 25) cannot be
used when an exposure warning indicator is on the LCD. Clear the
warning indicator by changing the aperture switch setting.
Pressing the [+] or [–] button to adjust exposure while an exposure
warning indicator is on the LCD causes a
+
exposure value to
appear. This is an EV value.
Low Battery Indicator
The low battery indicator ( ) appears on the LCD and the operation
indicator flashes orange whenever remaining battery power drops
below a certain level.
The above indications mean that the camera will soon turn off auto-
matically if you continue using it. Replace all three camera batteries
with new ones as soon as possible.
Operation
30
Note that power will turn off quicker if you are using the optional
Connection Kit for data communications through the camera’s
DIGITAL terminal when the low battery condition occurs. This is to
protect against problems due to sudden power failure during data
transfer.
• We strongly recommend that you use the optional AC adaptor
whenever sending or receiving data over the camera’s DIGITAL ter-
minal.
See page 13 for details on how to replace batteries.
Memory Full Message
The message “MEMORY FULL” appears
on the LCD and the operation indicator
flashes red whenever you press the shutter
button while camera memory is full. If you
want to record more images, you must first
delete some of the images already stored
in camera memory. See page 48 for details
on how to delete images.
31
Recording Images
Using the Self-Timer
With the Self-Timer, the shutter is released 10 seconds after you
press the
/PROTECT button.
1. Enter the Record Mode.
Set the function switch to the REC
position.
2. Start the Self-Timer operation.
Place the camera securely on a
tripod, desk or other stable sur-
face, with the image to be re-
corded in the LCD.
After composing the image, press
the /PROTECT button.
The timer countdown is indicated
by the flashing of the Self-timer in-
dicator. The image on the LCD
also clears when the countdown
begins. The LCD image reap-
pears after shutter is released and
the image is recorded.
To cancel on ongoing Self-Timer
operation, press the
/PRO-
TECT button or shutter button.
Important!
If battery power is low, camera power may turn off while a count-
down is in progress. If this happens, replace the batteries with new
ones.
/PROTECT ZOOM DISP MODE
+
PLAY
REC
Self-timer indicator
/PROTECT ZOOM DISP MODE
+
Operation
32
This section describes how to recall and view images stored in cam-
era memory. If the LCD is turned off, press the LCD button to turn it
on.
Displaying Images on the Camera’s LCD
The camera can store up to 96 images in memory. Images are se-
quentially numbered from 1 through 96. Think of camera memory like
a 96-page album of the images you record.
The following procedure describes how to display images on the
camera’s built-in LCD.
1. Enter the Playback Mode.
Slide the function switch to the
PLAY position.
2. Turn on the camera.
Slide the POWER switch in the di-
rection indicated by the arrow.
The POWER switch automatically
slides back to its original position
when you release it.
When power comes on, the page
that was displayed when you last
turned power off appears on the
LCD.
You can perform steps 1 and 2 in
either order (1 then 2, or 2 then 1).
Playing Back Images
PLAY
REC
POWER
ON/OFF
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QV-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QV-70 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info