472681
11
Zoom out
Zoom in
Previous page
1/250
Next page
P-11
QT-2100 Programming Manual
1-2. How to initialize QT-2100 terminal (add/replace one QT-2100)
Preparation:
1. All peripheral devices and QT-2100 terminals of this cluster
should be turned off.
2. Connect all of the peripheral devices (such as printer, display
etc.) to this QT-2100 terminal.
3. Connect this QT-2100 terminal to inline.
Operation:
4. Turn on all peripheral devices of this QT-2100 terminal.
And turn on all QT-2100 except this terminal of the cluster.
5. Turn on this QT-2100 terminal with pressing the left-most
key of the top row and release the key after buzzer sounds.
6. After releasing the key, enter “2000” (U.S.)/“1000” (other
area) and press the <ST> key.
7. Enter the current date (YY/MM/DD order) and time and
press the <YES> key.
8. In ID character field, the auto-defined ID No. is shown.
Please check if the same value is set in this field.
We recommend that you should not change the value.
9. In this field, you can select “1. Master/2. Backup Master/3.
Satellite/4.Selfmaster.”
Please choose former options and press the <YES> key.
10. In this field, the check cluster No, should be set, if your check
tracking system are divided in some clusters.
(Enter cluster No. “1” ~ “9”, if you use check cluster system.)
Date 00-00-00
Time 12:34 00
ID Character MC #01
Check System Master
Check cluster ID 0
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check System Master
Check cluster ID 0
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check cluster ID 0
Check System Master
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check System Master
Check cluster ID 0
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
Date 01-10-10
Time 12:34 00
ID Character MC #01
Check System Master
Check cluster ID 0
R/J/Order Printer(1) UP-350
R/J/Order Printer(2) UP-350
R/J/Order Printer(3) UP-350
Slip Printer SP-1300
OK? YES
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio QT2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio QT2010 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info