723303
7
Zoom out
Zoom in
Previous page
1/94
Next page
Overview and Setup
EN-6
1.
Before turning on power, rotate the 2 volume
knob as far as it will go in the direction shown
in the illustration below.
2.
Press the 1P (Power) button to turn on
power.
The message “Welcome” will appear momentarily,
followed by the tone name display. This indicates that the
Digital Piano is ready for use.
After pressing 1P (Power) to turn on power, do not
press any pedal until the Digital Piano is ready to play
(the tone name display appears).
Power may not turn on if you press the 1P (Power)
button too lightly. This does not indicate malfunction. If
this happens, apply more pressure when you press the
1P (Power) button.
3.
Use the 2 volume knob to adjust volume.
4.
To turn off power, hold down the 1P (Power)
button until “Bye” appears on the display.
Pressing the 1P (Power) button to turn off power actually
puts the Digital Piano into a standby state. Minute amounts
of current continue to flow within the Digital Piano in the
standby state. If you do not plan to use the Digital Piano for
a long time or if there is a lightning storm in your area, be
sure to unplug the AC adaptor from the power outlet.
Turning off power normally causes the tone number and
other settings to return to their initial defaults. You can
enable Auto Resume, which will save most settings when
power is turned off.
If Auto Resume is disabled, turning off power will initialize
settings, except for those below.
Tuning, LCD contrast, pairing information (Bluetooth
connection logs), expression/assignable pedal type,
expression/assignable pedal calibration, touch button
sensitivity
Power On Alert
After about six minutes of non-operation while the Digital
Piano is being powered by its AC adaptor, the Power On Alert
function will cause touch button lights to turn on and off
sequentially to remind you that power is on.
Button lights will return to normal if you touch a button, play
something on the keyboard, or perform some other operation.
To turn off power, hold down the 1P (Power) button until
“Bye” appears on the display.
Use FUNCTION parameter 107 (“Power On Alert”) to
enable or disable Power On Alert. For information about
FUNCTION parameters, see “Configuring Function
Settings (FUNCTION Mode)” (page EN-53).
If you are using batteries to power the Digital Piano, power
will turn off automatically after about six minutes of non-
use. See “Auto Power Off” (page EN-6).
Adjusting Display Contrast
Use FUNCTION parameter 109 (“LCD Contrast”) to adjust
display contrast. For information about FUNCTION
parameters, see “Configuring Function Settings (FUNCTION
Mode)” (page EN-53).
Operation Lock
Operation lock can be used to prevent operational errors
during performances by disabling button operations. For
details, see “Using Operation Lock” (page EN-59).
Returning to Initial Factory Defaults
You can use Factory Reset to return the Digital Piano’s stored
data and settings to their initial factory defaults any time you
want. For more information, see “To return all Digital Piano
settings and data to their initial factory defaults (Factory
Reset)” (page EN-60).
Auto Power Off
This Digital Piano is designed to turn off automatically to avoid
wasting power after no operation is performed for a preset
amount of time. The Auto Power Off trigger time is about four
hours when power is being supplied by the AC adaptor, or six
minutes under battery power.
You can disable Auto Power Off to ensure that power does
not turn off automatically during a concert, etc. To disable
Auto Power Off, select “Off” for FUNCTION parameter 106
(“Auto Power Off”). For information about FUNCTION
parameters, see “Configuring Function Settings
(FUNCTION Mode)” (page EN-53).
Turning Power On or Off
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-S3000 Privia at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-S3000 Privia in the language / languages: English as an attachment in your email.

The manual is 6,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-S3000 Privia

Casio PX-S3000 Privia Quick start guide - English - 4 pages

Casio PX-S3000 Privia Quick start guide - German - 4 pages

Casio PX-S3000 Privia User Manual - German - 94 pages

Casio PX-S3000 Privia Quick start guide - Dutch - 4 pages

Casio PX-S3000 Privia User Manual - Dutch - 94 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info