781705
30
Zoom out
Zoom in
Previous page
1/61
Next page
EN-29
Digital Piano Operations
To record the left-hand part track
1.
Depending on the track to be recorded,
configure the applicable settings.
•SeeRecorded MIDI Data” (page EN-27).
If you want to specify a beat and tempo setting, refer to
the information below and configure the settings.
To change the metronome beat” (page EN-21)
Specifying the Tempo” (page EN-22)
2.
While the 70 (REC) button is lit white, touch
70 (REC).
This enters record standby, which is indicated by flashing
70 (REC) (red) and 6a (white) lights.
At this time, the “L” indicator starts to flash. This
indicates that the left-hand part track will be recorded.
To exit a recording operation here, touch 70 (REC).
This makes 70 (REC) light white again.
3.
If you want the metronome to sound during
recording, touch 5METRONOME.
4.
To start recording, play something on the
keyboard, press the pedal or touch 6a.
This causes the 70 (REC) light (red) to change from
flashing to lit.
5.
When you are finished recording, touch 70
(REC) or 6a.
This makes 70 (REC) light white again.
6.
To replay the recording, touch 6a.
Restarting Recording From the Beginning
If you make a mistake and want to stop an ongoing
recording operation and restart recording from the
beginning, hold down 70 (REC) until its light flashes.
This discards everything you have recorded to the left-hand
track and returns to record standby. Perform the operation
from step 4 of the above procedure to restart recording.
To overdub a left-hand part track recording with
right-hand part track recording
1.
Perform steps 1 and 2 under “To record the
left-hand part track” (page EN-29).
2.
Press 70 (REC) as many times as necessary
until the “R” and “L” indicators are as
described below.
“R” indicator flashing. This indicates that the right-hand
part track will be recorded.
The “L” indicator stops flashing. This indicates that the
left-hand part track recording is complete.
3.
As required, specify whether or not you want
to play back the left-hand track while
recording.
(1) While holding down 6a, press keyboard key A0
(leftmost white key).
Each press of the A0 keyboard key toggles the “L”
indicator between lit and unlit.
L lit: Left-hand part track playback during recording.
L unlit: No left-hand part track playback during
recording.
(2) Release 6a.
4.
If you want the metronome to sound during
recording, touch 5METRONOME.
5.
To start recording, play something on the
keyboard, press the pedal or touch 6a.
This causes the 70 (REC) light (red) to change from
flashing to lit.
The settings configured for the left-hand part track are
applied for the beat and tempo.
6.
Perform the procedure starting from step 5
under “To record the left-hand part track
(page EN-29).
Restarting Overdubbing From the Beginning
If you make a mistake and want to stop an ongoing
overdubbing operation and restart overdubbing from the
beginning, hold down 70 (REC) until its light flashes.
This discards everything you have recorded to the right-
hand track and returns to record standby. Perform the
operation from step 5 of the above procedure to restart
overdubbing.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-S1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-S1100 in the language / languages: English as an attachment in your email.

The manual is 6.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-S1100

Casio PX-S1100 User Manual - English - 2 pages

Casio PX-S1100 User Manual - German - 61 pages

Casio PX-S1100 User Manual - Dutch - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info