466884
33
Zoom out
Zoom in
Previous page
1/41
Next page
English
Assembling the Stand
E-31
13.
Secure the corner brackets to the stand using
the screws you removed in step 10.
IMPORTANT!
Press down on the edges of the pedal unit as you
tighten the corner bracket screws.
The side panels have joint connectors inside that
engage with the corner bracket screws. If you have
trouble inserting the screws into the joint connector
screw holes, use a screwdriver to rotate the joint
connector and adjust the position of the screw hole
for easier access. See the detail drawing (marked
with a star) in the above illustration.
To tighten the joint connector and screw
14.
Connect the pedal unit cable.
For details about connections, see “To connect the
cable” (page E-32).
• Perform steps 1 through 9 starting on page E-28.
10.
Loosen the bracket screws at the bottom of
the stand’s side panels
and to create a
gap between the side panels and corner
brackets as shown in the illustration.
11.
As shown in the illustration, insert the pedal
unit brackets into to the gaps you created in
step 10.
(1) Rotate the screw counterclockwise about three
turns to ensure that the screw is in the center of the
joint connector.
(2) Slowly rotate the screw clockwise and confirm that
it tightens without resistance. If you feel any
resistance, it means that the screw is not engaging
properly with the joint connector. Rotate the screw
counterclockwise again and try to get it to engage
properly.
(3) If you experience problems getting the screw to
engage properly, use a screwdriver to rotate the
joint connector 180 degrees. Next perform steps (1)
and (2) again to engage the screw from the screw
hole on the other side.
• Forcibly tightening a screw while it is not
engaged properly can strip the threads of the
screw and joint connector, making it impossible
to tighten the screw.
Locating the Stand against a Wall
B
A
Gap
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-7 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-7

Casio PX-7 User Manual - German - 41 pages

Casio PX-7 User Manual - Dutch - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info