586832
62
Zoom out
Zoom in
Previous page
1/100
Next page
E-60
Song Memory Function
To delete specific note data
1
Perform steps 1 and 2 under To correct mistakes
while step recording above to display the note
you want to delete.
2
Press the [] CURSOR button twice.
3
In response to the Delete? message that appears
on the screen, press the YES button to delete the
displayed note.
Editing Memory Contents
After you record to digital piano memory, you can recall
individual notes and parameter settings (such as tone
number) and make any changes you want. This means you
can correct misplayed notes, make changes in tone
selections, etc.
The following types of data can be edited.
Note intensity
Notes
Chords
Tone numbers
Rhythm number
INTRO/ENDING 1 button, INTRO/ENDING 2 button,
VARIATION/FILL-IN 1 button, VARIATION/FILL-IN
2 button, SYNCHRO/FILL-IN NEXT button operations
To edit memory contents
1
Press the SONG MEMORY button three times to
enter step recording standby, and then use the [+]
and [] buttons to select a song number (0 to 4).
2
Use the SONG MEMORY TRACK buttons to
select the recorded track that you want to edit.
3
Press the [] CURSOR button to enter the editing
mode.
The REC indicator disappears from the display, and
the STEP indicator flashes.
Flash
SteS
g
0
p
Rec
4
Use the [] and [] CURSOR buttons to move to
the location in track where the note or parameter
you want to change is located.
Note editing example
5
Make any changes in the value that you want.
The actual procedures you use to change a parameter
depend on the type of data it contains. See Editing
Techniques and Display Contents on page E-61 for
details.
6
Repeat steps 4 and 5 to edit other parameters.
7
Press the START/STOP button to end editing when
you are finished.
NOTE
The only parameters that can be editted for Tracks 2
through 6 are notes and tone numbers.
In the case of real-time recording, you later can change
tone numbers you specified while recording to Tracks 1
through 6 is in progress.
You can only change tone numbers that were originally
set for Tracks 2 through 6 using step recording.
In the case of real-time recording, you later can change
rhythm numbers you specified while recording to Track
1 is in progress.
You can only change rhythm numbers that were originally
set for Track 1 using step recording.
You cannot use the edit procedure to add more data to
a recording.
You cannot move portions of a recording to a different
location within the recording.
Note lengths cannot be changed.
No t090 e C4
PitchVelocity
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-575R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-575R in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info