466877

Casio PX-3S Manual

63
Zoom out
Zoom in
Previous page
1/70
Next page
Appendix
E-61
English
Single-effect Algorithms
01: Equalizer
This is a three-band equalizer.
Parameter Value Ranges:
0 :Equalizer 1 Frequency (1.0, 1.3, 1.6, 2.0, 2.5, 3.2, 4.0, 5.0 [KHz])
Adjusts the center frequency of Equalizer 1.
1 :Equalizer 1 Gain (–12 to 0 to +12)
Adjusts the gain of Equalizer 1.
2 :Equalizer 2 Frequency (1.0, 1.3, 1.6, 2.0, 2.5, 3.2, 4.0, 5.0 [KHz])
Adjusts the center frequency of Equalizer 2.
3 :Equalizer 2 Gain (–12 to 0 to +12)
Adjusts the gain of Equalizer 2.
4 :Equalizer 3 Frequency (1.0, 1.3, 1.6, 2.0, 2.5, 3.2, 4.0, 5.0 [KHz])
Adjusts the center frequency of Equalizer 3.
5 :Equalizer 3 Gain (–12 to 0 to +12)
Adjusts the gain of Equalizer 3.
Note: The Gain value is not a dB value.
02: Compressor
Compresses the input signal, which can have the effect of
suppressing level variation and making it possible to sustain
dampened sounds longer.
Parameter Value Ranges:
0 :Depth (0 to 127)
Adjusts compression of the audio signal.
1 :Attack (0 to 127)
Adjusts the attack amount of the input signal. A smaller value
causes prompt compressor operation, which suppresses the
attack of the input signal. A larger values delays compressor
operation, which causes the attack of the input signal to be output
as-is.
2 :Release (0 to 127)
Adjusts the time from the point the input signal drops below a
certain level until the compression operation is stopped.
When an attack feeling is desired (no compression at the onset of
sound), set this parameter to as low a value as possible. To have
compression applied at all times, set a high value.
3 :Level (0 to 127)
Adjusts the output level.
Output volume changes in accordance with the Depth setting and
the characteristics of the input tone. Use this parameter to correct
for such changes.
03: Limiter
Limits the input signal level so it does not rise above a preset level.
Parameter Value Ranges:
0 :Limit (0 to 127)
Adjusts the volume level of the limit at which limiting is applied.
1 :Attack (0 to 127)
Adjusts the attack amount of the input signal.
2 :Release (0 to 127)
Adjusts the time from the point the input signal drops below a
certain level until the limit operation is stopped.
3 :Level (0 to 127)
Adjusts the output level.
Output volume changes in accordance with the Limit setting and
the characteristics of the input tone. Use this parameter to correct
for such changes.
04: Enhancer
Enhances the profiles of the low range and high range of the input
signal.
Parameter Value Ranges:
0 :Low Frequency (0 to 127)
Adjusts the low range enhancer frequency.
1 :Low Gain (0 to 127)
Adjusts the low range enhancer gain.
2 :High Frequency (0 to 127)
Adjusts the high range enhancer frequency.
3 :High Gain (0 to 127)
Adjusts the high range enhancer gain.
05: Chorus
This is a stereo chorus effect using a sine wave LFO.
Parameter Value Ranges:
0 :LFO Rate (0 to 127)
Adjusts the LFO rate.
1 :LFO Depth (0 to 127)
Adjusts the LFO depth.
2 :Feedback (–64 to 0 to +63)
Adjusts the strength of feedback
3 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
4 :Polarity (–, +)
Reverses the LFO signal of one channel, which changes the
expanse of sound.
06: Tremolo
Adjusts the volume of the input signal using an LFO.
Parameter Value Ranges:
0 :Rate (0 to 127)
Adjusts the tremolo rate.
1 :Depth (0 to 127)
Adjusts the tremolo depth.
07: Early Reflection
Extracts the initial reflection sound from reverberation sound.
Parameter Value Ranges:
0 :Wet Level (0 to 127)
Adjusts the level of the effect sound.
1 :Feedback (0 to 127)
Adjusts the repeat of the reflected sound.
2 :Tone (0 to 127)
Adjusts the tone of the reflected sound.
DSP Algorithm List
… 63 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-3S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-3S in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-3S

Casio PX-3S User Manual - German - 70 pages

Casio PX-3S User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info