466891

Casio PX-3 Manual

31
Zoom out
Zoom in
Previous page
1/70
Next page
English
Editing Zone Parameters
E-29
To change zone parameter settings
1.
Check to make sure that the lamp above the
 (MASTER CONTROL) button is lit.
•If it is unlit, press the  (MASTER CONTROL)
button to light it.
2.
Hold down the (ZONE EDIT) button until
the zone menu screen shown below appears.
•This will cause the (ZONE EDIT) button lamp to
light.
3.
Use the (ZONE EDIT) button to display the
zone menu page that contains the parameter
whose setting you want to change.
Example: Zone menu page 2
•Each press of the (ZONE EDIT) button advances
to the next page.
4.
Press the PARAMETER SELECTOR button
( (A) through  (D)) to select the
parameter whose setting you want to change.
•The brackets around the setting of parameter you
select will change from [ ] to %. This indicates that
editing of the setting is enabled.
Example: After the  (C) button is pressed
•Holding down one of the PARAMETER SELECTOR
buttons will display its full name. For example,
“MidCh” will change to “MIDI Out Ch”.
5.
Press the button that corresponds to the zone
whose settings you want to change:
(UPPER 1) button, (UPPER 2) button,
(LOWER 1) button, (LOWER 2) button.
•The lamp of the button you press will light, which
indicates its zone is selected.
6.
Use the  (EDIT w, q) buttons to change
the setting.
•Pressing w and q at the same time returns the
setting to its initial default.
•Holding down w or q will scroll through the
settings at high speed.
•For details about the meaning and range of each
parameter setting, see “Zone Parameter Settings”
(page E-30).
7.
If you want to change the setting of the same
parameter in other zones, perform steps 5
and 6 again.
8.
If you want to change the setting of another
parameter, perform steps 3 through 7 again
as required.
9.
After all of the zone parameters are the way
you want, hold down the (ZONE EDIT)
button until the button lamp goes out.
•This will return the menu along the bottom of the
display to the common menu.
Turning off the Digital Piano causes all zone
parameters to return to their initial default settings. If
you need to save a zone parameter setup, perform one
of the operations described below.
• If you want to restore the current setup the next time
you turn on the Digital Piano, perform the backup
operation. For details, see “Backup” (page E-40).
• If you don’t need to restore the current setup the next
time you turn on the Digital Piano but want to have it
on hand for recall when you need it, save the setup
to registration memory. For details, see “Using
Registration Memory” (page E-34).
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-3 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-3

Casio PX-3 User Manual - German - 70 pages

Casio PX-3 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info