466869
16
Zoom out
Zoom in
Previous page
1/50
Next page
Using the Mixer
E-48
6. Use the [+] and [–] buttons or the selector dial to
change the setting of the currently selected
parameter.
Press the EXIT/NO button to return to the part
selection screen in step 3 of this procedure.
Any time during the above procedure, you can
select another part by pressing the PART/
(MIXER) button.
7. Repeat steps 2 through 6 to change the settings
of other parameters if you want.
When changing parameter settings, you can play
notes on the keyboard as you change parameter
settings to see what effect your settings have.
8. After you are finished making the settings you
want, press the EXIT/NO button.
This section provides detailed explanations of each of the
mixer parameters, and their setting ranges.
J Tone: 271
This parameter controls the tones assigned to each part.
You can also change the tone assignment with the TONE
buttons. The tone you select is applied to the currently
selected part.
Use DRUM tone group values for the “Drum” and
“Percussion” parts.
You cannot select DRUM tone group values for “Bass”, or
“Chord” parts.
Changing the tone assigned to the Upper1 also changes
the tone assigned to Harmo1. Changing the tone assigned
to the Upper2 also changes the tone assigned to Harmo2.
J Part On/Off: On, Off
This parameter can be used to turn each part on (sounds) and
off (does not sound). The current on/off status of a part is
indicated by the on-screen level meter. See “Level Meter
Screen” on page E-13 for more information.
J Volume: 0 to 127
This parameter adjusts the overall volume of each part.
J Pan: –64 to 63*
Use this parameter to adjust the pan setting (volume balance
between the left and right speakers). A value of 0 puts the
speakers in balance, so the stereo center is halfway between
the two speakers. A smaller value shifts the stereo center left,
while a larger value shifts it right.
* When “On” is selected for the DSP you are using, these
settings are applied in accordance with each DSP
parameter setting.
The mixer lets you control the effects applied to each
individual part, making it different from the Effect Mode,
whose settings are applied to all parts in general.
J Reverb Send: 0 to 127
This parameter controls how much reverb is applied to a part.
A setting of 0 turns reverb off, while a setting of 127 applies
maximum reverb.
J Chorus Send: 0 to 127
This parameter controls how much chorus send is applied to
a part. A setting of 0 turns chorus send off, while a setting of
127 applies maximum chorus send.
“Chorus Send” does not work with drum sounds.
J DSP: On, Off
You can use this parameter to turn DSP off for a particular
channel, or to turn it on.
Mixer Parameters
Tone Parameters
Effect Parameters
426-E-050A
PL40NE01-1.book 48 ページ 2002年7月23日 火曜日 午後6時52
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PL-40R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PL-40R in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PL-40R

Casio PL-40R User Manual - English - 32 pages

Casio PL-40R User Manual - English - 10 pages

Casio PL-40R User Manual - English - 14 pages

Casio PL-40R User Manual - English - 34 pages

Casio PL-40R User Manual - German - 32 pages

Casio PL-40R User Manual - German - 10 pages

Casio PL-40R User Manual - German - 14 pages

Casio PL-40R User Manual - German - 50 pages

Casio PL-40R User Manual - German - 34 pages

Casio PL-40R User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info