723299
11
Zoom out
Zoom in
Previous page
1/82
Next page
EN-10
Connections
An external source connected to LINE IN R (right) is
output from the Digital Keyboard’s right speaker,
while a source connected to LINE IN L/MONO is
output from the left speaker. Use commercially
available connection cords that match the equipment
being connected to. When an external source is
connected to LINE IN L/MONO only, the input is
output from both speakers.
You can connect a smartphone or other music player to
AUDIO IN.
Use the AUDIO VOLUME controller to adjust the
volume level of sound input from the AUDIO IN
terminal. This volume level cannot be adjusted using
the 2 VOLUME controller.
Digital Keyboard built-in effects (reverb, chorus,
DSP) are also applied to sound input from the LINE
IN/MIC IN terminal. LINE IN/MIC IN input can be
recorded with the Audio Recorder.
Digital Keyboard built-in effects (reverb, chorus,
DSP) are not applied to AUDIO IN terminal input.
AUDIO IN input cannot be recorded with the
Audio Recorder.
Use commercially available cables to connect the
external audio equipment to the Digital Keyboard’s
LINE OUT jacks as shown in Figure . LINE OUT R
jack output is right channel sound, while LINE OUT
L/MONO jack output is left channel sound. It is up to
you to purchase connecting cables like the ones shown
in the illustration for connection of audio equipment.
Normally in this configuration you must set the audio
equipment’s input selector to the setting that specifies
the terminal (such as AUX IN) to which the Digital
Keyboard is connected. Use the Digital Keyboard’s
VOLUME controller to adjust the volume level.
Use commercially available cables to connect the
amplifier to the Digital Keyboard’s LINE OUT jacks as
shown in Figure . LINE OUT R jack output is right
channel sound, while LINE OUT L/MONO jack
output is left channel sound. Connecting to the
LINE OUT L/MONO jack only outputs a mixture of
both channels. It is up to you to purchase a connecting
cable like the one shown in the illustration for
connection of the amplifier. Use the Digital Keyboard’s
VOLUME controller to adjust the volume level.
You can connect an optionally available or
commercially available microphone* to the MIC IN
terminal and output the sound from the microphone
thorough the Digital Keyboard’s speakers.
*Use a dynamic microphone.
You can adjust the volume level of microphone input
with the MIC VOLUME controller. Microphone
volume control is independent from overall keyboard
volume.
Before connecting a microphone, make sure that the
Digital Keyboard and microphone are turned off.
Before connecting, set both the VOLUME and MIC
VOLUME controllers to low levels. Adjust volume
settings to appropriate levels after connecting the
microphone.
Using the Digital Keyboard to Produce
Sounds from an External Source
(Figures and )
Connecting to Audio Equipment
(Figure )
Connecting to a Musical Instrument
Amplifier (Figure )
Outputting Sound from a Microphone
MIC VOLUME controller
MIC IN jack
MZX300_X500-ES-1A.indd 12 2015/10/07 15:46:40
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio MZ-X300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio MZ-X300 in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio MZ-X300

Casio MZ-X300 User Manual - German - 82 pages

Casio MZ-X300 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info