466854
10
Zoom out
Zoom in
Previous page
1/19
Next page
E-41
Song Memory Function
1Chord name
2Clock number*
3Measure number
4Beat number
5Flash
* 48 clocks = 1beat
7. Input the length of the chord (how long it should
be played until the next chord is played).
Use the number keys to specify the length of a
chord. See “Specifying the Length of a Note” on
page E-42 for details.
Repeat steps 6 and 7 to input all the chords you
want.
If you make a mistake while step recording
chords, use the procedure under “Editing Data
While Step Recording” on page E-44 to make
corrections.
8. After you finish step recording, press the
START/STOP or SONG MEMORY button.
This enters playback standby for the song you
have just input. Pressing the START/STOP button
plays it back.
You can use the FF and REW buttons to change the
current input position during step recording. See “Editing
Data While Step Recording” on page E-44 for details.
Pressing the [0] button in step 7 inputs a rest. Note,
however, that any rests you input do not have any effect on
Auto Accompaniment.
In addition to chords, the following data is also recorded to
Track 1 during step recording.
Tone number
Rhythm number (step 4)
INTRO, SYNCHRO/ENDING, NORMAL/FILL-IN, VAR/
FILL-IN button operations (step 6)
When the MODE switch is set to NORMAL during step
recording, you can specify chords using a method that is
different from CASIO CHORD and FINGERED fingerings.
This chord specification method can be used to input 18
different chord types using only two keyboard keys, so
chords can be specified even if you don’t know how to
actually play them.
1Major
2Minor
3Augmented
4Diminished
5Suspended fourth
6Seventh
7Minor seventh
8Major seventh
9Minor major seventh
bk Seventh flat five
bl Minor seventh flat five
bm Seventh suspended four
bn Diminished seventh
bo Minor add ninth
bp Add ninth
bq Minor sixth
br Sixth
bs Six ninth
To specify a chord, hold down the key on the root input
keyboard that specifies the root, and press the key in the
chord type input keyboard to specify the chord type. When
inputting a chord with a specified bass note, pressing two
keys of the root input keyboard causes the lower note to be
specified as a bass note.
Example 1:
To input Gm7, hold down G on the root input keyboard
and press the m7 key on the chord type input keyboard.
Track 1 Contents After Step Recording
Specifying Chords in the Normal Mode
641A-E-043A
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio LK-73 deel 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio LK-73 deel 2 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio LK-73 deel 2

Casio LK-73 deel 2 User Manual - German - 19 pages

Casio LK-73 deel 2 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info