466854
7
Zoom out
Zoom in
Previous page
1/19
Next page
Song Memory Function
E-38
If you use a pedal during recording, pedal
operations are also recorded.
7. Press the START/STOP or SONG MEMORY
button to end recording when you are finished
playing.
If you make a mistake while recording, stop the record
operation and begin over again from step 1.
Using real-time recording to record to a track that already
contains recorded data replaces the existing recording with
the new one.
In addition to keyboard notes and accompaniment chords,
the following data is also recorded to Track 1 during real-time
recording. This data is used whenever Track 1 is played back.
Tone number
Rhythm number
INTRO, SYNCHRO/ENDING, NORMAL/FILL-IN, VAR/
FILL-IN button operations
Pedal operations
The keyboard has memory for approximately 5,200 notes.
You can use all 5,200 notes for a single song, or you can divide
memory between two different songs.
The measure number and note number flash on the
display whenever remaining memory is less than 100
notes.
1Flash
Recording automatically stops (and Auto
Accompaniment and rhythm stops playing if they are
being used) whenever memory becomes full.
Anything previously stored in memory is replaced
whenever you make a new recording.
Memory contents are retained as long as the keyboard is
supplied with electrical power. Unplugging the AC
adaptor when batteries are not loaded or when loaded
batteries are dead cuts off the keyboard’s electrical power
supply, causing all data stored in memory to be deleted.
Be sure to plug the keyboard into an electrical outlet with
the AC adaptor before replacing batteries.
Turning off the keyboard while a record operation is in
progress causes the contents of the track you are currently
recording to be lost.
The following describes a number of different variations you
can use when recording to Track 1 using real-time recording.
All of these variations are based upon the procedure
described under “To record to Track 1 using real-time
recording” on page E-37.
JTo record without rhythm
Skip step 5. Real-time recording without rhythm starts when
you press a keyboard key.
JTo start recording with synchro start
In place of step 5, press the SYNCHRO/ENDING button.
Auto Accompaniment and recording will both start when
you play a chord on the accompaniment keyboard.
JTo record using an intro, ending, or fill-in
During recording, the INTRO, SYNCHRO/ENDING,
NORMAL/FILL-IN, and VAR/FILL-IN buttons (pages E-25
through E-26) can all be used as they normally are.
JTo synchro start Auto Accompaniment with an
intro pattern
In place of step 5, press the SYNCHRO/ENDING button and
then the INTRO button. Auto Accompaniment will start with
the intro pattern when you play a chord on the
accompaniment keyboard.
JTo start Auto Accompaniment part way into a
recording
In place of step 5, press the SYNCHRO/ENDING button and
then play something on the melody keyboard to start. When
you reach the point where you want Auto Accompaniment to
start, play a chord on the accompaniment keyboard.
Track 1 Contents After Real-time Recording
Memory Capacity
Memory Data Storage
Track 1 Real-time Recording Variations
641A-E-040A
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio LK-73 deel 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio LK-73 deel 2 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio LK-73 deel 2

Casio LK-73 deel 2 User Manual - German - 19 pages

Casio LK-73 deel 2 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info