466852
15
Zoom out
Zoom in
Previous page
1/40
Next page
E-13
White Red PIN plug
Stereo standard plug
Audio connection
PHONES/OUTPUT Jack
Keyboard amp,
guitar amp, etc.
1
LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
2
3
Connections
Phones/Output Jack
Before connecting headphones or other external equipment,
be sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Rear Panel]
Connecting Headphones (Figure 1)
Connecting headphones cuts off output from the keyboards
built-in speakers, so you can play even late at night without
disturbing anyone.
Audio Equipment (Figure 2)
Connect the keyboard to an audio equipment using a
commercially available connecting cord with a standard plug
on one end and two PIN plugs on the other end. In this
configuration, you normally set the input selector of the audio
equipment to the terminal (usually marked AUX IN or
something similar) where the cord from the keyboard is
connected. See the user documentation that comes with your
audio equipment for full details.
Musical Instrument Amplifier (Figure 3)
Use a commercially available connecting cord to connect the
keyboard to a musical instrument amplifier.
NOTE
Be sure to use a connecting cord that has standard plugs on
the ends you connect to the keyboard and amplifier.
[Connection Example]
Keyboard or guitar amp
To keyboards
PHONES/OUTPUT
j
ack
Standard plug
INPUT
662A-E-015A
Sustain Jack
You can connect an optional sustain pedal (SP-3 or SP-20) to
the SUSTAIN jack to enable the capabilities described below.
Sustain Pedal
With piano tones, depressing the pedal causes notes to
linger, much like a pianos damper pedal.
With organ tones, depressing the pedal causes notes to
continue to sound until the pedal is released.
Using the Microphone Jack
Connecting a commercially available microphone to the MIC
IN jack makes it possible to sing along with the keyboards
built-in tunes or with output from a MIDI device. When
connecting a microphone, be sure to first adjust the MIC
VOLUME to a relatively low setting, and then adjust to the
level you want after connecting.
1.
Set the MIC VOLUME slider setting so it is on
the “MIN” side.
2.
Turn on the microphone’s on/off switch.
3.
Use the MIC VOLUME slider to adjust
microphone volume to the level you want.
[Rear Panel]
MIC VOLUME slider
Microphone
Microphone on/off switch
SUSTAIN jack
SP-20
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio LK-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio LK-100 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio LK-100

Casio LK-100 User Manual - German - 40 pages

Casio LK-100 User Manual - Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info